An Overview of Prepress Grey Balance Knowledge--Tuning Correction in Color Image Replication

7, hidden in the color image reproduction in the tone correction

1 Introduction

The three indicators for evaluating image copy quality are tone, color, and sharpness. Among them, the reproduction of the tone is most valued by people. Due to the constraints of various printing conditions, the color prints are limited to a brightness range that is much smaller than that of the original (color reversal film). Therefore, how to make the image tone optimal in a limited brightness range Reproduction is always a difficult point in color printing. With the increasing popularity of color desktop publishing systems, people can use image processing software to adjust the image. The tone reproduction of color images seems to be easy to accomplish. However, the actual situation is not the case. Since the density of a printed copy is generally smaller than that of the original, the reproduction of the original must be greatly reduced after copying. The color display shows images with a wide range of brightness, and the corresponding tonal compression is smaller and less noticeable. However, when the gradation of the image is limited to a small print density range that reflects variations in the brightness of the original, the proportion of the compression is magnified, so that the visual impression produced by the color display screen and the reproduced image of the printed matter is greatly increased. The difference. Therefore, the adjustment of image gradation must not rely solely on observing the display effect of the color display screen, but must carefully and fully analyze the emphasis of the reproduction of the original gradation and the content and subject represented by the original, and based on this, perform the adjustment on the tone. Correction.

2, tone correction correction tone actually contains two aspects.

One is to perform artistic processing on the gradation of manuscripts to meet the subjective requirements of customers for tone reproduction, such as the adjustment of the gradation of incorrectly photographed photographs. The second is to compensate for the influence of the printing process on the reproduction of the tone. From manuscripts to prints, the transmission of tones undergoes a series of technological processes. Due to the limitations of various conditions, the transmission of the steps is non-linear. In order to obtain a satisfactory reproduction of tones, it must be compensated. Tonal correction usually takes a grading compression and adjustment approach. The gradation compression is to make the gradation range of the manuscript suitable for the gradation range that the printing product can express under the printing condition. As shown in Figure 1.

The compression curve differs depending on the characteristics of the printing device, the printed material, and the original. Adjusting the tone is to adjust the tone curve appropriately for the ever-changing manuscript, change the shape of the tone curve, increase or decrease the contrast and details of different parts of the image to compensate the nonlinear change of the image copying process, so as to satisfy the copying The request. In the image processing software Photoshop, the curve compression and adjustment are mainly achieved by setting the highlight/dark point and adjusting the Curve curve. It can also be achieved in a small area by adjusting the brightness/contrast tool.

2.1 Setting of black and white fields (setting of highlights/dark points) Since small dots (1% to 5%) will be lost during printing, and more than 95% of dots will become solid, the first thing to do is select the image The highlights (the brightest points in the detail) and the darkest points (the darkest points in the details) are in the printable range. The highlight and shadow tools are used for high/dark adjustment, also known as black/white calibration. Setting the highlight/dark point accurately shows the tone levels and details of the original.

Correctly setting high/dark tone points is a key factor for successful replication. High light spots directly affect the tone levels of high-profile and mid-tones, and the human eye is very sensitive to high-profile brightness changes. Correctly setting the highlights allows the highlights in the original to be reproduced. In addition, the setting of highlights must also allow color reproduction to achieve a neutral gray balance. The setting principle of the dark tone is basically the same as that of the highlight. The difference is that we often determine the high light spot of the image by the naked eye, but it is not so convenient to set the dark tone point of the image correctly, generally it needs to be judged by a certain instrument. The correct setting of dark spots not only reflects the level of the image better, but also corrects the color shift of the original. The best way to set the black and white field in Photoshop is to use the Eyedropper highlight and shadow method, by selecting Image/Adjust/Curves and double clicking on the highlight Eyedropper to get the ColourPicker, which can be correctly reproduced on the print in the CMYK box. The dot value (such as coated paper printing: C5%, M3%, Y3%, K0%), then click on the light spot with the level of detail on the image to switch the dot to a printable range. The dark setting can be done with a darkened pipette.

2.2 Curves Curve Adjustment In Photoshop, the best way to adjust the tone of an image is to use the Curves dialog box. Execute the Image/Adjust/Curves command, the curve dialog box appears, select the CMYK channel, and change the shape of the curve by clicking and dragging. This curve describes the relationship between the unadjusted input value (gray value or dot coverage %) and the adjusted output value. The adjustment of the Curve curve should be made for the characteristics of different manuscripts. If the original tone is normal, the Curve curve can be adjusted linearly. That is, as shown in line 1 in Figure 4, the highlights of the original manuscript are poor in the high-profile level and the contrast is small. Therefore, when adjusting the tone, the adjustment should be based on high school adjustment to improve the high-profile level, contrast and color saturation. Degree, the adjusted curve is shown in Fig. 4 as the adjustment curve of Fig. 4 on the 2-line. From the adjusted curve, it can be seen that the high-profile layer is rich, the contrast is increased, and the color is deepened. In the manuscript of the dark tone level, the dark tone level is poor, the contrast is small, and the whole is dark. To do this, it is necessary to draw a dark tone and contrast the levels. As shown in Figure 3, line 3 shows. The adjusted image tone level is rich, the color is bright, and the contrast is also increased.

3, Conclusion

In summary, in the image processing of the desktop printing system, we can only compress and correct the gradation of the image based on the characteristics of the gradation distribution of the original document, combined with the effect of viewing the color display (which must undergo color correction). In order to get the ideal print.

Telescopic Traction Rope

For the retractable towing rope, its advantages are:
â‘ The operation is flexible and simple, the braking is agile, and the grip is more comfortable;
â‘¡Because the shell is made of sturdy plastic material, it is not easy to be damaged and easy to clean;
â‘¢The length of the traction belt is rich in options, generally 2-8 meters, which can give the pet a sufficient range of activities, increase the amount of activity, and be beneficial to health;
â‘£The traction belt can always be under constant tension, and it can automatically expand and contract, making the pet more free and happy;
⑤The traction belt is easy to clean, and it has a good protective effect on the webbing during use;
â‘¥The color of the shell is more unique, and the fashion sense is rising;
⑦More convenient to carry;
â‘§ Especially suitable for small and medium-sized dogs.
The retractable traction rope requires high mechanical structure design, and the braking device requires precision.

Telescopic Traction Rope,Strongest Retractable Dog Leashes,Classic Retractable Dog Leash,Pet Smart Retractable Leashes

DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproduct.com

Posted on