Auckland miniature precision injection molding machine

Auckland's first micro-precision injection molding machine model: M5-23, the main technical parameters are as follows: the maximum injection volume: 8 grams; injection rate: 10 cm3 / sec; clamping force: 5 tons; template maximum distance: 220 Mm. Two-cylinder injection molding, direct-acting hydraulic clamping structure. Its performance characteristics are: It can be used for molding small-scale precision injection molding of engineering plastics such as polyamides (PA nylon), polycarbonate (PC bulletproof), polyoxymethylene (POM steel) and so on. Pieces.

In order to meet the above-mentioned difficult molding conditions, the M5-23 Micro Injection Molding Machine adopts extraordinary and originality in terms of mechanical structure, overall layout, computer control or closed-loop hydraulic control system, etc. Rigorous and sophisticated design solutions.

In order to facilitate the installation of the mold and the replacement and connection of the ejector mechanism, a two-plate mold clamping structure is adopted. In order to increase the running accuracy of the mold clamping unit and the injection unit and reduce the movement resistance, the movable mold plate and the injection unit adopt rolling linear guides. Light and accurate positioning. To facilitate quick loading and unloading of molds, the movable platen and the stationary platen each have a mold positioning groove with a very accurate positioning, and a quick and easy mold fastening mechanism can replace a set of molds within 3-5 minutes. The whole machine adopts a totally enclosed door that conforms to the CE safety standard. However, in order to facilitate the adjustment of any part of the machine at any time, in the stopped state, the three front doors and the top cover can be freely opened. For the occasion where a large amount of glass fiber is added in the plastic parts, the cylinder and the screw are all XALOY alloyed to improve their wear resistance and service life.