![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The so-called ecological board is the melamine decorative paper pressed on the solid wood board (carpentry board and multi-layer board). Compared with traditional products, Junwang Ecological Board pursues environmental protection, safety, low carbon and paint-free, and is favored by woodworking masters and home manufacturers. In the past two years, there have been many ecological boards on the market. The prices vary greatly, and the quality of the products is uneven. This makes it difficult for consumers to choose.
There are two main situations that affect the cost of ecological boards:
1. Surface paper:
It can be divided into ink paper and color paste paper, which is the legendary imported paper and domestic paper. Ink paper is brightly colored and more like logs. It contains triamines that are more resistant to fading and have a stronger three-dimensional effect. The price is also expensive, the color paper is far from the cost, and the cost is only half of the paper. In order to reduce costs, small factories generally use color paste paper. All of the King's Eco-Boards are made of imported ink paper, which is durable and does not fade.
2, raw materials:
It is a recipe, or a material with bark, hollow, and hollow, which directly affects the final price of the ecological board. Regardless of whether it is compared with the traditional blockboard decorative board or the particleboard MDF, the King's Eco Board has enough reason for you to choose. For a penny, a share of goods, consumers must have the ability to identify themselves. Spend money and buy good things.
Â
How to choose a good product can pass the following points:
1. Environmental protection:
The ecological board, as its name suggests, is not environmentally friendly. At present, the manufacturer of this line can be controlled at E0, but the E1 eco-board is already quite environmentally friendly and suitable for use in any situation. King's ecological board, glue produced by itself, reaching the E0 standard.
2, look at the level:
Detection method: Look at the long (2 m 44) side at a 45-degree angle where the light is slightly dark, whether there is unevenness, and whether the three stitching seams and sand marks on the surface are obvious. This is not a hard standard, but it reflects the craft capability of a manufacturer.
3, see the ironing:
Look at the surface whether there are dried flowers and wet flowers, the home decoration is called carbonization, such as the surface of the plate has a sparkling crystal-like dot-like block, the time will be black or the surface appears like paint and color, which are dry and wet flowers. These reflect the degree of factory mastery and are one of the important issues reflecting the quality of the board.
4, look faded:
The paper fades. Relatively speaking, the ink paper is less likely to fade, and the color paper is much worse (for example, the difference between paint and paint). Detection method: After stacking two plates and stacking them for a few hours under the sun, look at the board below for color difference.
5, see if cracking, bubbling:
Plate cracking and bubbling are the glue strength and the substrate is definitely a quality problem for no reason, the angle of view can be seen.
6. See if the paper is completely solid:
Seeing if the paper is completely solid is equivalent to not cooking the rice completely. It can be seen that the surface is not resistant to pollution, and it is not very handy to feel the cotton when touched by hand. The surface of the board looks like a mist. The best thing is to feel the best like metal. Test method: Apply a shoe polish, blush or oil pen on the board for a few minutes to see if it can be completely wiped off.
7. Thickness difference detection of the whole board:
Detection method: Use a caliper to measure the thickness of multiple points on an ecological board. The error is 0.6mm, which is normal, but it can be relaxed when it is installed at home.
8, see if the deformation:
The deformation of the sheet, the degree of deformation of the sheet also reflects the manufacturer's technological ability, and the static bending strength of the sheet is not enough. In general, it is normal for the sheet to be slightly deformed in the top two of each pack before it is finished. After making a wardrobe or finished product (excluding large-area swing doors), if there is deformation, it is a quality problem. Detection method: eyes can be seen.
The quality of the king, the king of the plate, do not forget the initial heart, adhere to the crown quality. King's plate advocates people to pay attention to their living environment, and to present the most sought-after and tasteful group of people with the highest quality products, to present the most beautiful and exquisite time, and to taste the rare happiness. Prestige life begins with the king's ecological plate.
Cupboard Handles
Shenzhen Hongjingyuan Metal&Plastic Products Co., Ltd. , https://www.hjypull.com