![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
As we all know, medium-density fiberboard production is mainly based on branches, thinning materials and fast-growing materials. Therefore, medium-density fiberboard is a non-productive wood-based panel product that saves precious natural wood. Therefore, experts also call it the sunrise industry. But in the medium-density fiberboard production enterprises, is it possible to dig up with the potential to save wood? Based on years of experience and experience, the author believes that it can be explored from the following ways (to produce 50,000 cubic meters of 8 mm thick products per year, and calculate the amount of wood that can be saved): 1. Use fast curing adhesive to reduce hot pressing It is the thickness of the pre-cured layer of the MDF. If the thickness of the pre-cured layer is reduced from 3 mm to 0.6 mm, 14302.52 cubic meters of wood can be saved each year. 2, reduce the waste of the kerf, if the width of the kerf is reduced from 4.5 mm to 3.7 mm, each kerf is reduced by 0.8 mm, and each plate has 4 kerfs, which can save 98.4 cubic meters of wood per year. 3, reduce the amount of broken saw shreds, each sentence reduced by 5 mm, can save 615 cubic meters of wood per year. 4. Improve the wood chip acquisition rate of the chipper. In addition to improving the management level, reducing the rate of waste products, and improving the utilization rate of production line equipment, it is a way to save wood.
IVE cheer,IVE Light stick,IVE souvenir
Shanghai Liuyuan Trading Co. , Ltd. , https://www.ly-weighing.com