![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Solvent-free one-component polyurethane adhesive MOR-FREE B 57
The product type MOR-FREE B 57 is a solvent-free one-component polyurethane adhesive used at high temperatures.
Application range MOR-FREE B 57 is suitable for plastic film OPP/PE and aluminum foil and paper, cardboard composite.
Adhesives and other components of the material to be composited: interactions may occur between inks, film auxiliaries, coatings, and the contents of the package and cause unpredictable quality changes. Therefore, before the official production, a test must be conducted to confirm the suitability of the adhesive with the composite material and the packaged product.
Methylene diphenylisocyanate migration may occur in the nylon/polyvinylacetate structure.
The food specification MOR-FREE B 57 complies with the requirements of the Food Hygiene Standards set forth in the FDA's CFR21, §175.105.
Product data Morfree B 57
NCO-component - solid content % 100
- Viscosity (100°C) mPa×s 825 ± 75
- Specific gravity (g/ml) 1.20 ± 0.01 $ Page break $
Cold seal adhesive Robond CS 1004
The product type Robond CS 1004 is a water-soluble cold-sealing adhesive applied to flexible packaging. It has wide applicability and small odor. Under pressure, it can bond with itself and provide good sealing strength. Packaging speed, no contraction effect.
Applications Robond CS 1004 is particularly suitable for untreated BOPP films, BOPP pearl films, and BOPP films with acrylic and PVdC coatings.
There may be interactions between the cold sealant and other components in the material to be coated and the contents of the package, and lead to unpredictable quality changes. Therefore, before the official production, a test must be conducted to confirm the suitability of the cold sealant and the packaging material and the packaged product.
The food specification Robond CS 1004 complies with German BGA Food Packaging Regulations and Food Hygiene Standards as required by the FDA's CFR21, §175.105.
Product Typical Data Robond CS 1004
- Solid content % 55
- Viscosity (sec/20°C) 18 (ISO 2431)
-pH 9.5-10.5
- Specific gravity (g/ml) 0.98
- Color milky white - dry film appearance light fog, slightly harder
$Page break $
Cold seal adhesive Robond CS 1005
The product type Robond CS 1005 is a water-soluble cold-sealing adhesive applied to flexible packaging. It has wide applicability and small odor. Under pressure, it can bond with itself and provide good sealing strength. Packaging speed, no contraction effect.
Applications Robond CS 1005 is particularly suitable for untreated BOPP films, BOPP pearl films, and BOPP films with acrylic and PVdC coatings.
There may be interactions between the cold sealant and other components in the material to be coated and the contents of the package, and lead to unpredictable quality changes. Therefore, before the formal production, a test must be conducted to confirm the suitability of the cold sealant and the packaging material and the packaged product.
The food specification Robond CS 1005 complies with German BGA Food Packaging Regulations and the Food Sanitation Standards required by the FDA's CFR21, §175.105.
Product Typical Data Robond CS 1005
- Solid content % 56
- Viscosity (sec/20°C) 18 (ISO 2423)
-pH 9.5-10.5
- Specific gravity (g/ml) 0.98
- Color Milky White - Dry Film Apparent Light Fog, Softer $ Page Break $
Solvent-free two-component polyurethane adhesive
MOR-FREE 403LV / C-411 and C-83
The product types MOR-FREE 403LV/C-411 and C-83 are solvent-free two-component polyurethane adhesives that are used at room temperature.
Applications MOR-FREE 403LV/ C-411 and C-83 are suitable for the compounding of transparent films and foils.
Adhesives and other components of the material to be composited: interactions may occur between inks, film auxiliaries, coatings, and the contents of the package and cause unpredictable quality changes. Therefore, before the official production, a test must be conducted to confirm the suitability of the adhesive with the composite material and the packaged product.
Methylene diphenylisocyanate migration may occur in the nylon/polyvinylacetate structure.
The food specifications MOR-FREE 403LV/C-411 and C-83 comply with the requirements of the Food Hygiene Standards set forth in the US FDA's CFR21, §175.105.
Product Data Mor-Free 403LV Mor-Free C-83 Mor-Free C-411
NCO-component OH- component OH- component - solid content 100 100 100
- Viscosity (25°C) mPa×s 1700 ± 400 2000 ± 500 1100 ± 300
- Specific Gravity (g/ml) 1.17 ± 0.02 1.07 ± 0.02 1.10 ± 0.02
- Blending ratio w/w: Standard 100 50 60
Polyamide / Polyethylene 100 60 70
Aluminized film / Celluloid 100 70 50 $ page break $
ADCOTE 502 S / Catalyst F
Product Type ADCOTE 502 S / Catalyst F is a solvent-based two-component polyester adhesive with excellent compounding properties for flexible packaging.
Applications ADCOTE 502 S / Catalyst F For cellophane, treated polyolefins, polyesters, nylon membranes, aluminum foils, aluminized membranes, materials with PVDC coatings, and heat-sealing layers of treated extruded films, etc. Good adhesion. It has clear and transparent, high composite strength and high temperature resistance, chemical resistance and other excellent properties, especially for plastic film and aluminum foil has an excellent composite effect. It is mainly used for the soft packaging compounding of meat, cheese, seasoning and liquid products, and the compounding of retort-proof packaging.
Adhesives and other components of the material to be composited: interactions may occur between inks, film auxiliaries, coatings, and the contents of the package and cause unpredictable quality changes. Therefore, before the formal production, a test must be conducted to confirm the suitability of the adhesive with the composite material and the packaged product.
The food specification ADCOTE 502 S / Catalyst F complies with the Food Hygiene Standards required by the FDA of the United States, CFR21, §175.105.
Product Data ADCOTE 545 S CATALYST F
OH- component NCO-component - solid content % 51 75
- Viscosity (25°C) mPa×s 2500 1800
- Specific gravity g/ml 0.98 1.19
- Solvents Ethyl acetate, ethyl acetate - blend ratio w/w 100 6.5
Satisfy all your creativity&Give you infinite happiness
WILL TRADE: A Home Decoration brand,vintage and modern various styles,provides customers with more artistic visual enjoyment.
If you are tired of boring wall or want to have more fun for life, then prominent design of this beautiful timepiece is the perfect addition. Not only can remind you accurate time at any time, and a personal style decoration. This wall clock is the perfect combination of function and style!
LEIKE MODERN WALL CLOCKS
Description:
Product material:Modern clocks made by Iron,showing modern style;
1.Be careful to knock , don't touch the hook, so as not to break the hook.
2.Please avoid using it in rotten wood and where the wall is falling off.
3.If used on tiles, nail them at the seams to avoid damaging the tile surface.
4.The hook theory bears 10 kilograms. If it is used for other purposes, please do not overweight.
5.Don`t tune the time using your hands, it might impair the clock mechanism. There are control buttons on the back of the centerpiece, please use them.
Decorative wall clock is suitable for living room, office, bedroom, kitchen, school, classroom and other home or public places.
Wooden Wall Clocks, Metal Wall Clocks, Glass Wall Clocks, Modern Wall Clocks, Antique Wall Clocks
HISMOK(SHENZHEN)TECHNOLOGY CO.,LTD , https://www.hismoke-cigarette.com