![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
When we don't need a trekking pole for a while, we must store the trekking poles separately and store the trekking poles upright, allowing the water to flow out slowly.
When maintaining the trekking poles, a very small amount of rust remover [eg WD40] can be used to treat the rust on the surface, but before use, all the grease on the surface must be removed before it affects the trekking poles. Adjust the lock function. In addition, it is also possible to use a very fine sandpaper to remove the rust on the surface and keep the trekking pole's locking function intact. [Although this may abrade the indicator scale above the trekking pole]
Rotary-locking trekking poles may cause the locking effect due to falling of the rust-bearing powder of the strut and blocking the locking grommet. Therefore, it is necessary to remove the rust in the grommet during maintenance, and particularly to combine them. Before using it, make sure it is very clean and does not contain any rust and grease.
There are occasional minor problems with the trekking poles, but they can easily be eliminated. Gently tapping the locked area or weaving the trekking poles can reduce some of the friction and then you can unscrew the trekking poles. .
A problem with rotation-locking trekking poles is that the grommet in the strut will rotate with the strut and cannot be locked. The cause of this type of failure is that the grommet is too dirty. Just remove the strut and place it. After the grommets are thoroughly cleaned, they can be reinstalled to solve the problem. If they cannot be locked, after the struts are disassembled, turn the thinner struts into the grommets to open the grommets and insert them directly. Within the thicker struts, it's better to lock it after adjusting to the desired length.
The toughest condition of the three-section adjustable trekking pole lies in the fact that the length of the three poles is equivalent. Therefore, when using, do not extend only one of the poles without using another pole, or exceed the warning scale of the pole. , This will cause the trekking pole to bend easily and become unusable! The best way to use it is to adjust the length of the other two extendable struts to the same length. This will ensure the support strength of the trekking poles and also increase the lifespan of the trekking poles.
The PP File Holder is designed with digital printing, silk screen printing, UV printing and other printing methods and accessories. It is a combination of practicality and aesthetic culture.
Jilin Y.F. Imp & Exp Co., Ltd is an exporter and manufacturer (Cang nan Y.F. Stationery & Gift Co., Ltd.)in Creative products, such as Backpack ,Shoulder Bag, Pencil Case , Handbag,Multifunctional Bag. Coin Purse .Cosmetic Bag.Storage bags. File holder.Canvas handbag and Notebook etc. which is a professional stationery company setting research and development, producing, sales and trade into one. Our company always takes quality, service, efficiency and innovation as our management philosophy. Since our brand Y.F. has been put on the market, the products sell well throughout the country consistently, and be exported to Europe and America,, and South America countries as well as regions, where the product enjoys great customer loyalty and good population. Choose Y.F. is not to choose a batch of stationery, but to choose a commitment and responsibility, Thanks for your attention, support, trust an cooperation. Wish to establish long-term business relationship with you in the near future.
Pp File Holder,Plastic File Holder,Metal File Holder,Office File Rack
Jilin Y.F. Import & Export Co.,Ltd , https://www.yfpencilcase.com