Application of SLE4428 card in IC card dispenser

As an efficient, safe, convenient and practical new information carrier, IC card has been applied to various fields and industries. This paper introduces an IC card automatic refueling system for the management mode of the manual payment and settlement mode of the gas station. The user can hold the fuel card to the oil station at any time to the station. The system is simple and practical.

How the SLE4428 card works

The SLE4428 card is a chip from Siemens. It is cheap, easy to use, has password verification and other functions, and has high data security. The card has a built-in high voltage generator, which can be operated with a working voltage of 2.7~5.5V. It can be directly driven by the I/O port of the MCU. No other peripheral devices are needed, which simplifies the interface circuit.

1. SLE4428 card features

The basic features of the SLE4428 card are as follows: i byte addressing with 1024 X 8-bit EEPROM memory; irrevocable byte write protection, ie the three-wire serial bus protocol cannot be changed after data is solidified: the status is indicated on the data line after programming is completed; At least 10 million erase cycles: at least 10 years data retention period; contact point configuration and serial interface conform to IS07816 standard; 2-byte programmable security code, data can be written only after the security code is verified correctly Card inside.

The pin diagram of the SLE4428 card is shown in Figure 1. The pin function table is shown in Table 1.

2. SLE4428 card operation timing

The SLE4428 card exchanges information with the chip interface through the three-wire serial bus, and the data is converted and the security logic is verified under the unified coordination of the program controller and the clock pulse. The operation timing of the SLE4428 card mainly includes reset and reset acknowledge, command input timing, erase and write timing, erase only or write only timing, read data timing, and PSC verify timing.

Full text download address: http://bbs.yktchina.com/disptopic.asp?boardid=3&topicid=3097&frompage=1

Spray Mop

• Generation Microfiber Spray Mop - Upon great feedback from our customer about this best spray mop. Extra thicker wood floor mop replacement pads is the one of the core improvement of this mops, more absorbent, won`t wear out after 100+ time uses. Enhanced sturdy trigger made from more durable material, will not broke easily. Fully sealed bottle helps you get away from leaking problem.
• Simple Yet Effective – Our commercial wet mops are no battery needed, no noise bothered, just spray and mopping. If you still cleaning like one hand hold spray cleaner, one hand hold mop clean, you will feel so release if you got our mops. The new thicker mop pads, it will absorb dirt, dust, debris like magnet in case pushing dirt around and all the mess.
• Just The Right Weight, Lightweight And Efficient – Leave the heavy messy bucket alone, refillable spray floor mop come with the 410ML Water tank which is a proper weight hold in hand, you could fill mops up with your favorite cleaner, just make sure clean the water tank when you finished the cleaning, and do not add hot water in. Simply push the trigger on the handle,the mops sprayer turns water to water mist evenly, save water and make mopping efficiency with minimize efforts than other mops.
• Superb Quality and Ergonomic Design – Microfiber cleaning spray mop floor hardwood mop having 3 of the poles are from durable, higher quality aluminum, sturdy enough for long term using. No bend over for the extendable pole, relaxed your back from now. 360 degree rotating spray mops for floor cleaning head, reach out every corner of your house which is hard to clean before, like under the couch, wardrobe or bed and so on. The commercial wet mop is safe to use on tile, wood, hardwood, laminate flooring.

Spray Mop,Best Spray Mop,Cleaning Spray Mop,Wall Cleaner Spray And Mop

NINGBO NEWMORE IMP. & EXP. Co., LTD. , https://www.zjnewmore888.com