Correct installation of edible oil filling machine is the key to safe production

No matter what kind of work the industry is engaged in, safety is first, because people’s life is priceless, and any high commission cost will not be able to return to a healthy body. Therefore, regardless of whether you are engaged in any labor work, you must pay attention to Safety. Especially in the production, processing and manufacturing industries, it is even more prudent to cherish life. With the continuous improvement of the social economy, the degree of automation of machinery has also been greatly improved, bringing great convenience to our production operations, but there are also many hidden dangers buried in it. The main reason is the irreparable trauma caused by improper human operations. The machinery is fixed, but the manipulators are flexible. Therefore, in order to safely complete the production, the first line must constrain people's self-control ability and strictly follow the equipment. The operating procedures on the line can effectively guarantee the safety of production. At the same time, personal safety can also be effectively guaranteed.

Safe production, from scratch, the key to the first is the installation of the equipment, according to technical requirements to complete the installation of the machine is to ensure half of the success, and quickly share with you today the correct installation of edible oil filling machine:

1. Remove the air filter pressure regulator valve from the edible oil filler housing and install it on the front panel of the chassis. Unscrew the double oil cup and pour good oil into the horizontal line, about 20ml. Do not top up.
2. After inserting the compressed air pipe into the inlet of the double manifold (Φ8 pipe, Φ10 pipe), turn on the air outlet valve of the air compressor and adjust the two knobs on the top of the two bodies. The right side is the pressure adjustment, and the knob will be lifted when adjusting. When the hour hand is rotated to increase the pressure, the counterclockwise rotation is used to reduce the pressure, the pressure is adjusted to 0.3-0.4 MPa (3-4 kg/cm2), and the right side is adjusted for the lubricating oil intake. The right side can be rotated according to the fuel consumption, generally Take a cup of oil 10-15 business days and add it later.
3, check the electrical parts, each connector is firm.
4. Turn on the power supply 220V and connect the grounding cable to ensure safety. The working voltage of this unit is the safe voltage DC 24V.
5. Put the foot switch in front of the table of the edible oil filling machine, and work one pedal at a time. If not, the device will work continuously.
6. Connect the oil inlet pipe, connect it with the steel wire hose, wind the sealing tape around the interface, tighten it with the steel wire, prevent air leakage, and install the filter equipment.
7. Adjust the metering magnetic switch of the edible oil filling machine to the corresponding filling position. The upper end of the magnetic switch shall prevail. Then the filling test shall be performed, and several fillings shall be performed to drain the air in the pipeline.

After the installation is complete, you can use the device to debug the device in accordance with its operation and use. Quickly remind you that in the debugging process, you must carefully and repeatedly debug to ensure the weight of the filling product. If necessary, you can adjust it to a certain moment. The degree is fixed so that the scale and filling degree are not often adjusted during the subsequent use, which facilitates the operation of the device. It saves time for enterprise products and seizes opportunities.