How to ensure the size accuracy of custom built-in wardrobes

[ Chinese wardrobe network ] In recent years, the wardrobe into the wall slowly entered everyone's sight. Nowadays, many houses are small-sized, and the space of small-sized houses is relatively small. What should be paid attention to during renovation to save space as much as possible? It is also planned before the renovation, in which the wardrobe decoration is one of the details that can save space. The wall-mounted wardrobe features a space-saving and decorative room and is a practical wardrobe. However, in the purchase, many people do not know how to control the size of the wall wardrobe.

Refining size

“The cabinets that are going to be in the wall must be measured after the renovation is completed.” This is the most important advice the experts give to the readers.

The wall of the fortress cabinet must be horizontal and vertical so that it can be tightly seamed with the cabinet. It is best to ask the workers to shave all the sides of the wall vertically and evenly; be sure to refill the cabinet after the floor and wall paint are all completed. Dimensions, in order to prevent the difference; to measure from top to bottom, take the minimum value as the size of the cabinet; install it first outside the assembly, and then push the wall.

If the wall has more deviations, it is more difficult to adjust, and it can be beautified by adding a baffle on the side.

Through the top wardrobe to guard against deformation

Under normal circumstances, the cabinets provided by furniture manufacturers will not exceed 2.4 meters, but the height of most consumers' homes is around 2.6 meters to 2.7 meters. The problem of cabinet deformation has to be considered.

If you use a custom-made ultra-large panel, you can achieve the overall effect of the ultra-high cabinet, stability and aesthetics. When the cabinet is super high, the door will be heavier, so the hinges and other hardware are very important. Consumers must not be taken lightly in the choice of hardware, otherwise it is prone to danger.

Digital Display Straight Cup

Creative Smart Water Cup Display Temperature Cup New 304 Stainless Steel Vacuum Cup Gift Customized Business Cup Straight Cup The inner layer is 304 and the outer layer is 201 stainless steel. Because there is a stainless steel tea compartment, it is sealed and leak-proof.

Digital Display Straight Cup,Water Tumbler Cup,Drinking-Water Cup,Thermos Cup

Wuyi Xukai industry and Trade Co.,Ltd , https://www.wyxukai.com