How to make salt spray corrosion aging test chamber run quickly and long-term

Almost every user of salt spray corrosion aging test chambers wants their machines to always run quickly. On the phone that receives customer inquiries, people often ask questions like this. Next, I will introduce you to the shortcut of how to make the salt spray corrosion aging test chamber run for a long time.

First, pay attention to three major points

1, boot

2, equipment operation

3, maintenance

Second, boot

1. Turn on the power;

2. Turn on the air source;

3. The automatic water supply valve is opened;

4. Close the pressure tank;

5. Close the drain valve of the experiment box;

6. The inlet pressure is expressed to 2Kg;

7. Turn on the power supply on the operation panel of the salt spray box;

8. Check the low water level;

9, check the low salt water red light;

10. Add salt to the salt spray corrosion aging test chamber;

11. Add salt water to eliminate the lighting and alarm failure;

12, formulated into a test solution with a concentration of 5 ± 1%;

13. Put the items to be tested into the experiment box;

14. Adjust the test product test time;

15. Adjust the timer;

16. Turn on the control panel time switch;

17. Turn on the spray switch;

18. The control panel pressure gauge moves quickly;

19. The salt spray box spray work begins.

Second, the equipment is running

1. Ensure that the power source, water source and gas source are normal;

2. The temperature of the pressure tank must be maintained at 47±1 °C.

3. The temperature of the salt water tank is 35±1°C;

4. The relative humidity of the laboratory must be maintained above 85%;

5. The amount of spray liquid is calculated over the entire time.

Third, salt spray corrosion aging test box maintenance:

1, stop

1) Turn off the control panel spray switch;

2) Turn on the defogging switch;

3) The mist in the experiment box is removed;

4) Open the lid of the experiment box;

2, maintenance

Cleaning

1) Pressure barrel;

2) Experiment box;

3) salt water barrels;

4) nozzle;

2) Deactivate the machine to be cleaned;

3) nozzle removal;

4) Take it lightly;

5) Rinse off with water.

According to the above method, the salt spray corrosion aging test chamber can be operated quickly and for a long time!

Automatic Pet Feeder

Automatic Pet Feeder,Automatic Feeder,Timed Cat Feeder,Auto Cat Feeder

Green Source(Guangzhou) Co. Ltd. , https://www.stargalaxycn.com