What board is used for making wardrobes? How to choose wardrobe sheets?

[ Chinese wardrobe net ] When using the wardrobe , it is normal to use some materials. The quality of the board will be much better. The purpose of using the wardrobe is to make the home more tidy, and it is also possible to put some things in the closet and sort them out without sorrow and dust. For this reason, when people are making wardrobes, they will be confused about choosing boards. Then Xiaobian will introduce what kind of board is used to make the wardrobe? How to choose the wardrobe sheet?

What board is used to make a wardrobe?

1, plywood

Good quality, high density,

2, MDF

MDF, there are several, there are many thicknesses, if the wardrobe is generally 1, 2 or 1.5, but the board of the wardrobe is generally called his composite board, there is a single side, two-sided distinction, there is a pattern How much to make with a composite board will make you see some nail holes, not beautiful. MDF oil is convenient and the construction is between the two. Wood board can be spliced, nailed, screwed, and easy to construct, but surface treatment is troublesome. The moisture-proof board is a particle board. Nowadays, it is often seen on the market, it is not covered with paint, and the cost is low. It is often used to make cabinets.

3, large core board

The cabinet core is made of 12% large core board, which is made of fireproof board or waterproof wood grain paper. The appearance of the 3 cm color panel (there are: Sapele / Blackberry / Red Tan / Elm, etc.) depends on your own personal preference. There is also a large core board to be attached to the panel, the panel will definitely be painted, the cost and the composite board are completely divided. Of course, in terms of hardness, the quality will definitely be much better. It is better to use the large core board for the wardrobe. The strength of the same level of the finger joint board is not high, but the span of the wardrobe is relatively large, and the required strength is relatively high. If you want to use the direct board, the strength is higher. Sealing the panel, then the cost will increase accordingly.

How to choose the wardrobe plate?

1, solid wood multi-layer board: multi-layer board is made of three or more layers of a solid wood veneer or thin-plate adhesive hot pressing, common three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood , five PCT, nine PCT, twelve PCT). The core has: poplar, mixed wood, amine wood multi-layer board; good structural strength and good stability. The plywood has a large amount of glue, and it must be edge-sealed during construction to reduce pollution.

2, blockboard: large core board of solid wood core, good grip strength, high strength, quality, sound absorption, heat insulation, etc., and water content is not high, between 10% -13%; Blockboard: The surface of the blockboard should be flat, without warping, deformation, no blistering or dent; the core strips are evenly arranged, the gap is small, the core strip is free from decay, breakage, wormholes, thrift and so on.

3, the fireproof board is made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives, and the decorative plate made by autoclaving technology, the thickness is generally 0.6. ―1.2mm; fireproof board is economical, high-strength, fire-resistant and moisture-proof. Fireproof panels are mainly used for cabinets, showcases, etc. The construction of fireproof board has higher requirements for sticking glue. It is necessary to master the thickness of the glue and the glue drying time, and it should be pasted one time.

The above describes what kind of board is used to make the wardrobe? How to choose the wardrobe board? In fact, many people do not understand the choice of wardrobe, we must look at the surface, taste, etc., to confirm the quality from different places. In particular, the taste of some wardrobes is the key to distinguishing the quality of the wardrobe, especially the wooden wardrobe. Be careful when choosing. The paint used by the brand is generally environmentally friendly and has a relatively small taste.

Baby Bottle Microwave Sterilizer

When it comes to the Baby Bottle Microwave Sterilizer,we support customization based on 2000pcs.It is made of PP+ABS safe materia,BPA free,food grade.In normal,it can hold on 6 milk bottle.Compared to the steam machine,it can be sterilized in the microwave.In short,it is cheap,small but convenient .

Baby Bottle Microwave Sterilizer,Microwave Sterilizer For Baby,Microwave Sterilizer For Bottles,Baby Bottle Microwave Steriliser

Jiangsu Xinbei Electrical Appliances Co.,Ltd , https://www.whosalebreastpump.com