Packaging Drop Tester Features

The package drop tester is designed to simulate the situation where the product simulates different edges, angles, and faces falling on the ground at different heights after packaging to understand the damage of the product and assess the impact strength of the product packaging component when it falls. , which improves packaging.

Package drop tester features:

1. Fully automatic single-wing design, electric contracting arm, acceleration greater than 7g, ensuring the free separation of the cargo carrier and the packaging test specimen, achieving the free fall of the packaging test piece, small impact vibration, stable and reliable, is the real completion of surface, edge Angle drop test;

2. The drop tester has electric reset, electronically controlled drop and electric lifting device, which is easy to use;

3. The drop tester is equipped with a digital display height display and a decoder for height tracking so that the drop height of the product can be accurately given, and the error with the preset drop height is not more than 2% or 10 mm;

4. Motor failure protection, high and low limit protection, emergency stop protection;

5. Drop test machine meets the standards: ISO 2248, JIS Z0202-87, GB/T4857.5-92

The package drop tester of Kunshan Haida Instrument can perform free drop test on the surface, corners, and edges of the package. It is equipped with a digital display height display and a decoder for high-level tracking to accurately give the product drop height. Preset drop height error does not exceed 2% or 10mm; single-arm dual-column structure, with electric reset, electronically controlled drop and electric lifting device, easy to use; unique hydraulic buffer device greatly improves the service life and stability of the machine And security. The single arm setting can easily place the product, and the angle error between the falling impact surface and the bottom plane is less than or equal to 5.