Small spray dryer | latest offer of photochemical reaction instrument manufacturers

Product description of small spray dryer:

It is suitable for the production of micro-particulate powder in universities, research institutes and laboratories of food, pharmaceutical and chemical enterprises. It is widely applicable to all solutions such as emulsions and suspensions. It is suitable for drying heat-sensitive substances such as biological products, biological pesticides and enzymes. Preparations, etc. Because the sprayed material is only subject to high temperature and instantaneous heating when sprayed into a mist, these active materials maintain their active ingredients unchanged after drying.

Specifically used in the following fields: beverage flavors and pigments milk and egg products plant and vegetable extracts pharmaceutical synthesis heat-sensitive substances plastic polymers and resin fragrances blood products ceramics and superconductor biochemical products dye soap and detergent food adhesive oxide bone And tooth powder, etc.

Main features of small spray dryer:

â— Original imported nozzle, high efficiency.

â— Color large touch screen operation, combination of automatic control and manual control, Chinese and English panel, parameter LCD display.

â— Real-time PID constant temperature control technology, accurate temperature control, heating temperature control accuracy Â± 1 â„ƒ.

â— The spraying, drying and collecting devices are made of transparent, high-quality and high-temperature resistant borosilicate glass, and the entire spray drying experiment process is visible.

â— The atomization structure of the two-fluid spray, made of high-precision 316 stainless steel, the particle diameter of the powder spray is normally distributed, and the fluidity is good.

â— The jet is automatically cleared (through needle) and the frequency is adjustable. When the nozzle is blocked, it will be automatically cleared to ensure the continuity of the experiment.

â— The feeding amount can be adjusted by feeding peristaltic pump.

â— Special protection function, the fan does not start, the heater cannot start.

â— Built-in imported oil-free air compressor, the noise is less than 50db.

â— Equipped with air inlet filter to ensure sample purity.

â— The particle size of the dried product is uniform, and more than 95% of the dry powder is at the same particle size.

Technical parameters of small spray dryer:

Process processor (L / H) 0.05 ~ 1 Maximum water evaporation capacity (L / H) 1.8 Maximum inlet air temperature (Â° C) 250 Typical average particle size range (microns) 2 ~ 25 Cocurrent dual fluid nozzles are protected by nitrogen The system can be equipped with heating methods, electric heating, parts in contact with materials, borosilicate glass and 316L stainless steel. Total power (kw) 3.8 Power supply 220V / 50Hz Installation space requirements (open length Ã— width Ã— height m) 0.7 Ã— 0.65 Ã— 1.1 kg) 58

Product description of multifunctional photochemical reaction instrument:

YM-GHX series photochemical reaction instrument is mainly used to study the photochemical reaction under gas or liquid medium, fixed or flow system, ultraviolet light or simulated visible light, and whether the reaction vessel is loaded with TiO2 photocatalyst. It has the functions of providing samples for analyzing reaction products and free radicals, measuring reaction kinetic constants, measuring quantum yield, etc. It is widely used in research fields such as chemical synthesis, environmental protection and life sciences.

The main features of the multifunctional photochemical reactor:

â— Microcomputer controller with continuously adjustable power.

â— The controller is equipped with an ammeter and a voltmeter to facilitate the observation of current and voltage changes.

â— There is a microcomputer timer, which can be timed in steps.

â— Internally illuminated light source, fully received light.

â— Equipped with eight-bit magnetic stirring device to make the sample fully mixed and receive light.

â— Double-layer quartz cold trap, which can be circulated with cooling water to avoid damage to the light source temperature is too high.

â— There are 2 special sockets on the left side of the box, which are used for the lamp source and the plug of the stirring reactor.

â— Equipped with a removable cart, easy to move or fix.

Technical parameters of multifunctional photochemical reactor:

(1) Main part

â˜… The power of the light source can be adjusted continuously.

â˜… Yuming integrated light source controller can be used for mercury, xenon, metal halide and other light sources.

â˜… Mercury lamp power adjustment range: 100 ~ 1000W can be adjusted continuously.

â˜… Xenon lamp power adjustment range: 100 ~ 1000W can be adjusted continuously.

â˜… Metal halide lamp power adjustment range: 100 ~ 500W can be adjusted continuously.

â˜… Cooling capacity of cooling water circulation device:> 1000W

â˜… The cooling water circulation device is equipped with casters and bottom drain valve.

(2) Small capacity reaction part

â˜… Quartz test tube specifications: 30ml, 50ml (or customized).

â˜… Can handle 8 samples (or customized) at the same time.

â˜… Eight-bit magnetic stirring device can synchronously adjust the stirring speed of 8 samples.

(3) Large-capacity reaction part

â˜… The glass reaction vessel can be 250ml, 500ml, 1000ml, etc. (or customized).

â˜… Powerful magnetic stirrer makes the sample fully mixed and receives light.

Product configuration of multifunctional photochemical reaction instrument:

Cold water circulation device: low temperature constant temperature circulator for photochemical reactor, reaction dark box: 1, Yuming special light source controller: 1, quartz cold trap: 1, mercury lamp: 1, xenon lamp: 1, metal halide lamp : 1 piece, eight-bit magnetic stirring device: 1 set, quartz test tubes: 16 (30ml, 50ml each 8), strong magnetic stirrer: 1 set, sample reaction bottle: 1 (250ml, 500ml, 1000ml optional) , Mobile cart: 1.

Smart Lifting Three Person Desk

Many people can adjust the office desk, many people work to improve efficiency, can be splice together to form a large office area, the spinal cord is very good health protection, each product has the corresponding introduction.

Our product line involves domestic appliances, medical equipment, intelligent systems, and other fields. HERSTAR-as a bright star in her heart-carries her love for the country and people with social responsibility as an entrepreneur. By concentrating on high-end Quality and the spirit of craftsmanship, Herstar is committed to becoming a national enterprise with advanced management, firstclass products, excellent Quality, and extraordinary taste, endeavoring to become a world-class manufacturing enterprise! "Work better and healthier!" Herstar's design team integrates aesthetics and craftsmanship into the products to achieve harmony and unity between people, objects, and the environment. Herstar provides a one-stop solution service for our clients to create an intelligent and healthy office environment.

Smart Lifting Three Person Desk,Face To Face Desk,Smart Working Lifting Table,Electric Lifting Table

Suzhou Herstar Medical Technology Co., Ltd. , https://www.hosunherstar.com