Things to pay attention to before the new blanket

The rubber cloth is composed of a surface adhesive layer and a base cloth, and is divided into a radial direction and a horizontal direction. Since the radial extension of the blanket is smaller than that of the transverse direction, the radial direction with a small amount of expansion and contraction must be used as the direction of the blanket's stress when cutting, that is, the radial direction of the blanket is consistent with the circumferential direction of the drum . When cutting the blanket, all four sides should be at right angles and the diagonals are equal, so that the blanket can be uniformly stressed on the drum to ensure product quality. At the same time, the bite of the blanket and the two ends of the trailing tip are punched separately, and the position of the eyelet should be on the same horizontal line, and there must be no height to prevent the blanket from being skewed.

When the new blanket is installed on the machine, it should be tightened first, and then check the blanket for wrinkles and bubbles. If there is no problem after inspection, let the roller turn and compact for a few times before tightening. The new blanket has better elasticity and better stretchability. Tightening the blanket should be carried out gradually. It is required that the trailing edge and the bite should be carried out at the same time. Do not tighten on one side. Every time it is tightened, it is ready to be pressed and rolled for 3 to 5 minutes, so that the purpose of tightening can be achieved by repeating it several times. After the blanket is tightened, we should also visually or gently touch the blanket to check whether the blanket and its cushion material are plain clothes, whether there are irregularities caused by ink skin, paper scraps, etc., and promptly deal with it.

Before the new blanket is put on the machine, the thickness of the liner should be determined according to the specific thickness, uniformity and elasticity of the blanket, and the amount of liner paper should be determined with a micrometer. If the liner is too thick, it will cause greater pressure between the blanket and the printing plate, affect the printing quality, make the print thicker and distorted, and expand the dots, and it is easier to cause premature damage to the blanket. In addition, it will also accelerate the printing plate Graphic wear.

Flower Pot With Saucer

Main Pot: The main pot portion of a flower pot with a saucer typically resembles a standard plant container. It can be made of various materials such as plastic, ceramic, terracotta, metal, or fiberglass. The pot is where the plant is placed and where its roots grow. It comes in different shapes, sizes, colors, and designs to suit different preferences and interior or exterior decor themes.

Saucer: The saucer is a shallow tray or dish that sits underneath the flower pot. Its primary purpose is to catch excess water that drains out of the bottom of the pot during watering, preventing water from seeping onto surfaces and potentially causing damage. The saucer helps to protect floors, furniture, and outdoor surfaces from water stains or rot.

Material: The saucer is often made from the same material as the pot, although it can also be made from materials like plastic, ceramic, or metal. Plastic saucers are lightweight and easy to clean, while ceramic saucers provide a more decorative touch. Some saucers may have a glazed finish to match the pot, while others may have a simple, unglazed surface.

Size: The size of the saucer is typically slightly larger in diameter than the pot itself, allowing it to catch any water that drips down from the pot. The depth of the saucer is usually shallow, enough to hold a small amount of water without overflowing. The size of the saucer should be proportionate to the size of the pot and the plant it contains.

Design: Flower pots with saucers come in a variety of designs to complement different aesthetics and gardening preferences. They may feature simple, minimalist designs for a contemporary look, or intricate patterns and decorative details for a more ornate style. Some saucers have raised edges or decorative rims, while others have a smooth, flat surface.

Functionality: The saucer plays a crucial role in plant care by helping to maintain proper drainage and prevent waterlogging, which can lead to root rot. It also makes watering easier by catching any excess water that drains out of the pot, allowing the plant to absorb moisture as needed.

Overall, a flower pot with a saucer is a practical and attractive option for growing plants indoors or outdoors. It provides a convenient solution for maintaining proper drainage and protecting surfaces from water damage while adding a decorative touch to any space.

Glazed Pot With Saucer , Ceramic Flower Pot With Saucer Attached

Yixing Bocai Pottery Co.,Ltd , https://www.bocaipottery.com