![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[ China Wardrobe ] Whether it is a custom closet or a wardrobe, acceptance is an important step. The following small series will introduce you some knowledge about the acceptance of the wardrobe, let's get to know it!
1, look at the appearance
Mainly check whether the surface paint film is smooth, bright, with or without quality defects such as falling, bubbles, wrinkles; also depends on whether the color difference of the veneer is large, whether the pattern is consistent, whether there are corrosion points, dead knots, broken parts, etc.; Whether the edge sealing treatment of wood-based panel parts is strict and straight, with or without degumming, whether the surface is smooth and flat, and there is no bump. The periphery of the glass door should be polished and clean, flexible to open and close, no collapse, scratches, symmetry of the four corners, and the position of the hand is correct. The installation of various plug angles, pressure rails and slides should be in the correct position, firm and firm, and flexible to open.
2, look at the process
Check the rationality and firmness of the connection points between each component of the wardrobe. Each connection point of the overall structure, including the connection points between the horizontal and vertical, must be tight, no gaps, and no looseness. The drawers and cabinet doors should be opened and closed flexibly and returned correctly. The periphery of the glass door should be polished and clean, flexible to open and close, no collapse, scratches, symmetry of the four corners, and the position of the buckle is positive. The installation of various plug angles, pressure rails and slides should be in the correct position, level and firm, flexible to open, and correct in return.
3, see the structure
Whether the frame is correct and firm. Gently push it by hand. If there is a sway or a squeaking sound, the structure is not strong. Check if the verticality of the closet is vertical, whether the grounding surface is flat, etc. How to inspect the house and inspect the house.
4, the door panel
The installation of the door panels shall correspond to each other, the height shall be the same, the width of all the slits shall be the same, and the handles shall be on the same horizontal line. The pulley of the closet is divided into the upper wheel and the lower wheel. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled.
5, look at the drawer
Pulling the drawer about 20mm, it can be automatically closed, indicating that the load-bearing capacity is stronger.
The above is the major standards introduced by Xiaobian for the wardrobe inspection, I hope to help you in the decoration acceptance!
Keep waste properly contained and add a touch of modern style to your space with our plastic hand press trash bin. You could choose the can according to your daily preference because we not only have plastic hand press trash can but also have stainless steel hand press garbage bin. The trash can with press type lid will replace the traditional top open Wastepaper Basket to collect your trash& make your home neat and guard your home health by knocking the bacterium and virus inside the trash bin. What's more, it is designed with a special knock on its lid to help you close or open the lid much more effortless.
Trash can with press type lid, Plastic hand press trash bin, Stainless steel hand press garbage bin
ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com