![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[ Chinese wardrobe net ] Compared with the purchase of wardrobes , many people prefer to customize the wardrobe according to their actual needs, but the variety of wardrobe sheets often make people hesitate. Today, the website will tell you about the wardrobe plates and the advantages and disadvantages of different wardrobe plates. I hope to help you choose the right wardrobe plate.
First, particle board
Particleboard (also known as "solid wood particle board") is a piece of wood or other wood fiber material that is cut into a certain size as a raw material. After drying, it is mixed with an adhesive, a hardener and a waterproofing agent under heat, pressure and a certain temperature. An artificial board that has been pressed.
advantage:
The inside is a granular shape with a cross-displacement structure, the performance in each direction is basically the same, and the lateral load-bearing capacity is good. In the production process, the amount of glue used is small and the environmental protection factor is relatively high.
The surface is flat, the texture is realistic, the weight is uniform, the thickness error is small, the pollution is resistant, the aging is resistant, the appearance is beautiful, and various veneers can be performed. The finished product does not need to be dried again, it can be used directly, and the sound absorption and sound insulation properties are also good.
Disadvantages:
The interior is granular and not easy to mill. The edge is rough, easy to absorb moisture, and it is easy to cause violent teeth when cutting the board. Therefore, some processes require higher processing equipment; it is not suitable for on-site production.
Second, the MDF
MDF (also known as "fibre board") is made of wood materials such as trunk materials, branches and other wood materials or other plant fibers, which are thermally ground (milled into powder), sized (urea resin or other suitable adhesive), dried, An artificial board made by hot pressing after paving.
advantage:
All kinds of veneer, adhesive film, veneer, light metal sheet and other materials can be glued on the surface of the MDF; various paints and paints can also be applied on the MDF, the effect is very beautiful.
The hard MDF is punched and drilled, and can also be made into a sound absorbing panel. The surface is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the shape is easy to avoid the problems of decay, insects and the like.
Excellent physical properties, good nail holding power, uniform material, no dehydration problems.
Disadvantages:
If it is not moisture-proof, it will swell when it sees water, and it will be deformed for a long time.
Third, the moisture board
The moisture-proof board is to add a certain proportion of moisture-proof particles to the particle board substrate, so that the degree of water swelling of the board is greatly reduced.
advantage:
In addition to the advantages of particle board: there is also a prominent advantage: it is moisture-proof. However, it should be noted that the moisture-proof board and the ordinary particle board are immersed in water, and the expansion ratio is the same. The so-called moisture-proof only acts on the moisture in the air.
Disadvantages:
The interior is granular and not easy to mill. The edge is rough, easy to absorb moisture, and it is easy to cause violent teeth when cutting the board. Therefore, some processes require higher processing equipment; it is not suitable for on-site production.
Fourth, the large core board
The large core board (also known as "blockboard" is made of two pieces of veneer laminated in the middle of the board. The middle board is made of high quality natural wood board after heat treatment (ie drying in the drying room). The specification of the wooden strip is made up of the jigsaw machine. The two sides of the spliced ​​wooden board are covered with two layers of high-quality veneers, and then made by cold and hot press. The total of the two sides of the large core board is glued. The thickness shall not be less than 3mm. The corners of all kinds of large core plates shall be missing, and the width within the nominal width shall not exceed 5mm and the length shall not exceed 20mm.
advantage:
The clamping force is good, the strength is high, and it has the characteristics of firmness, sound absorption, heat insulation, etc., and the water content is not high, between 10% and 13%, and the processing is simple.
The plate of the machine is subjected to a large pressing force, the gap is extremely small, the splicing is flat, the bearing capacity is uniform, long-term use, compact structure and deformation.
Disadvantages:
Poor moisture resistance.
Hand-made is to manually insert the wooden strip into the splint. The wooden strip is subjected to less pressing force, uneven splicing, large gap, poor nail holding force, and cannot be sawed and processed. It is only suitable for sub-projects of partial decoration. Such as the solid wood floor cushion board and so on.
Five, fir board
The fir board is a large-format thick plate that is made of short and small materials and is widened by fingers. It is generally made of high-quality wood (more commonly used fir, so commonly known as fir) as a substrate, after high-temperature degreasing and drying, finger jointing, jigsaw, sanding and other processes.
advantage:
After high-temperature degreasing treatment, it is made into a warp knot; it is durable, no insects, no deformation, and also emits a light scent of wood.
It is a natural plate with original flavor, clear wood grain, natural and generous, and has the natural simplicity of returning to nature. The amount of glue used is only seven tenths of wood board, and it is environmentally friendly.
The surface is sanded and thickened, smooth and smooth, and the surface does not need to be attached to the panel when making the wardrobe, saving labor and materials, and economical.
Disadvantages:
Poor quality of the fir board, moisture content is not up to standard, easy to deform, cracking after a long time.
Six, multi-layer solid wood board
It is made of three or more layers of veneer or thin board glue. The splint is generally divided into three specifications: 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT.
advantage:
The deformation is small, the strength is large, the internal quality is good (the hole is small after the sawing, the layer is not layered), and the flatness is good.
The structure has good stability, is not easy to be deformed, can properly adjust the indoor temperature and humidity, and the surface layer solid wood skin material has the texture and feel of natural and real wood.
Disadvantages:
If a poor quality glue is used, it is easy to cause low environmental protection, and may even cause separation and deformation between the laminates, resulting in poor effect and short life.
High requirements on the processing technology, such as cold pressing, hot pressing, sanding and other procedures in the processing process are required to be high, if the multi-layer solid wood board produced by the manufacturer with low processing technology can not achieve the desired effect, so The quality of the multi-layer solid wood panels on the market is also very different, and we need to check more at the time of purchase.
Seven, Australian pine board
Australian pine board (also known as "oriented structural particle board"), Australian pine board is an Australian imported medium density board.
advantage:
With a high internal bond strength, each board's surface is highly sanded to ensure a first-class finish. The smooth surface makes it easy to stain, clean, color, spray and inlay and cover in various forms.
Not only the surface of the board has the strength and various advantages of natural wood: it also avoids the defects of natural wood and is an upgraded product of plywood. It has a well-balanced structure with smooth edges and excellent mechanical properties.
Disadvantages:
Without nails, it has a good grip on the screws, but the nails that are hammered into the hammer have good performance.
Eight, Ou Song board
Ou Song board (also known as "oriented structure particle board"), using fast-growing materials, thinning materials (such as pine, poplar, etc.) as raw materials, processed by special equipment to grow 40-100mm, width 5-20mm, thickness 0.3-0.7mm The flakes are made by drying, screening, sizing, directional paving, continuous hot forming, etc., a new type of plate that has developed rapidly from Europe in the 1970s and 1980s.
advantage:
Low formaldehyde release, durable and durable, the furniture is lighter and flatter.
The interior is oriented structure, no joints, no gaps, cracks, good overall uniformity, and high internal strength. Therefore, both the center and the edge have the superior nail holding ability that ordinary sheets cannot match.
Disadvantages:
Like the Australian pine board, the Ou Song board does not eat nails. It has a good grip on the screws, but the nails that are hammered into the hammer have the same performance.
, The business will make a proofing list according to the products required by the customer, and the proofing list will indicate the purchased materials and production methods;
2. Purchase materials according to the proofing list; if there is a LOGO production
3. According to the proofing sheet and the design drawings or samples provided by the customer, the board room master will produce the paper grid. The paper grid is the carrier of the size of each part of the bag and the materials used;
4. Cut out the material according to the paper grid, and have a good structural sample of the caravan parking space;
5. The board room master and the business review the structural samples, and after communication, determine the revision plan;
6. According to the modification plan, the prefabricated house will be modified in terms of paper format/object collocation/process modification, etc., and finally make a model;
7. Take a photo to show the new model to the customer, confirm it, OK, and send it to the customer.
Essential Oil Bags,Essential Oil Storage Bag,Essential Oil Carry Bag,Essential Oil Finishing Storage Bag
Dongguan Junkai Packaging Products Co., Ltd , https://www.diystoragecase.com