What is the installation method for the 3m central water softener installation strategy?

The central soft water machine is relatively famous. Everyone must pay attention to it. I don’t know if you have ever understood the 3m central water softener before? This brand is also famous in China. This article will specifically target this central water softener. Launched the installation strategy, and friends who want to know how to install it quickly.

First, 3m central soft water machine installation strategy

1, check the packaging

Packaging inspection is an essential part. When the water softener is delivered, let the owner confirm whether the machine is in good condition. When the standard product water softener is delivered, the straps on the outer packaging are fixed with plastic buckles. After unpacking, the installer will explain the features of some products to the owner, let the owner know how the water is being treated, and use it with confidence. Connect the water inlet pipe of the water purifier. Because the water purifier and water softener of this household are installed together, the water pipes are divided into two roads, which are connected to the machines of clean water and soft water. Temporarily connect a water pipe next to the water purifier to discharge the sewage that needs to be removed when flushing the inside of the water purifier. Because it is a new machine, there are some residual impurities inside it that are easily overlooked.

2, nozzle installation

Generally, the water softener can be set to flush every 12 hours on the computer board. The time is about 30 seconds each time. However, when it is the first time to debug, it needs to be flushed for about half an hour because it is a new machine. Clean the inlet and outlet of the water softener. Because the water pipes are installed first, it is inevitable that there will be some dust on the outside. If it is not a regular installation team, this is usually ignored. It is worth mentioning that the installation workers should use a white tape to wrap a few laps at the junction of each nozzle, paying attention to leak prevention and bacteria. The installation of the nozzle can improve the safety factor.

3. Parameter setting (display panel interface).

The control valve used in the water softener series adopts the front and back mode setting: the foreground mode is suitable for the user, the current time is set, the regeneration initiation time (default is 2:00), the raw water hardness value is input (the hardness value measured in step 4) and The parameters such as the running water supply amount are displayed. The background mode is set according to the specifications, and the model manufacturer is set at the factory. No user settings are required. If you change the background setting, please contact the manufacturer or local distributor, and the company's after-sales service personnel will come to you for debugging and maintenance. The parameters are set to be as environmentally friendly and energy efficient as possible.

Second, what is the installation method?

The activated carbon in the 3m central water softener is different from other activated carbons. It uses high polymerization technology to re-sinter the superfine powdered activated carbon into a compact activated carbon rod through a special polymer material, which greatly improves the content of activated carbon and is effective. Sexually, effectively remove heavy metal pollution. Minimize the damage that water can cause to the human body.

The 3m pre-filter can filter the water at home and is the first coarse filtration equipment to filter out sediment, rust and large particulate matter in tap water. The central water purifier mainly uses the adsorption of activated carbon and KDF to remove residual chlorine, colloids and impurities in the tap water, so that the water directly meets the drinking water standard. The water purified by the straight drink machine can be directly consumed, brewed tea or soup. Don't worry that drinking will be bad for the human body.

The installation position of the central water softener and the water purifier is the same, but the soft water machine is divided into two types: the cabinet type and the cabinet type. It relies on the water pressure to work. There is no water tank, so the water purifier uses the booster. When the pump is running, it is necessary to turn on the power. Before installing the water purifier, it is necessary to install the power supply board under the cabinet. It is better to make a concealed function, so that even if the water softener is not installed, the overall effect of the cabinet will not be damaged, and it will not be affected by the decoration. So the reference to the installation site is still very important.

The emergence of the 3m central water softener is actually designed for the safety of drinking water from home. Naturally, its working principle will become the object of curiosity for many people. In fact, the installation of this water softener is not difficult. As long as you understand his working principle, there will be fewer problems in the installation.