Automatic self-cleaning filter makes water for papermaking not a problem

Everyone knows that paper mills are large users of water, and water that has been removed by paper mills will cause water pollution if left untreated. It can be imagined that how many water sources will be used and how many harmful water bodies will be discharged in the day after the Novo Big Paper Mill will come down. This figure is even more striking.

The birth of fully automatic self-cleaning filters will minimize this figure.

In the production process of a typical paper mill, in order to solve the production cost, water will be taken nearby, such as rivers and lakes. Papermaking requires water purity. This is not a problem for a fully automatic self-cleaning filter.

Automatic self-cleaning filter can take the water source well inlet to the filter body. First, the coarse filter screen will filter out the bulky debris in the water, and then enter the fine filter to perform precise filtration. In this way, a clean water source that meets the needs of papermaking can be obtained.

The automatic self-cleaning filter itself is low in cost, easy to operate, and has a simple working principle. It is an economically effective alternative product similar to a company.

This new fully automatic self-cleaning filter has many features, such as high precision, large area, and small system pressure loss area, which can fully filter the suspended particles in the water and reduce the paper machine damage.

Automatic self-cleaning filter can not only effectively filter the water source in rivers and lakes, but also the sewage discharged after papermaking can be recycled. This forms a virtuous circle. The paper mill only needs to draw a certain water source and filter through the fully automatic self-cleaning filter. The use of circulating filtration of the sewage discharged from it not only reduces the demand for water resources, but also protects the water resources. What's more important is to greatly increase the economic efficiency of the company.

The automatic and intelligent automation of automatic self-cleaning filters is also a highlight. It not only speeds up work efficiency, but also reduces the waste of water when producing filtration.

The automatic self-cleaning filter offers you a lot to trust.

Automatic filter self-cleaning filter applicable characteristics:

1. The filter equipment control system is sensitive to reaction and precise in operation. It can flexibly adjust the backwash pressure difference time and time setting value according to different water sources and filtration accuracy.

2. In the backwash process of the filter equipment, each (group) filter screen will be backwashed in sequence; the filter will be safely and efficiently cleaned, while other filters will not be affected and filtration will continue.

3.Pneumatic drain valve is used for the filter equipment. The backwashing time is short, the backwashing water consumption is small, and the environmental protection economy.

4. The structure of the filter equipment is compact and reasonable, with a small footprint and flexible installation and movement.

5. Filter device electrical system uses integrated control mode, can achieve remote control

6. The filter device adopts the internal mechanical structure of patented technology, realizing the true high-pressure backwash function, which can easily and completely remove the impurities retained by the filter. The cleaning has no dead angle and the flux has no attenuation, which ensures the filtration efficiency and long-term. The service life.