GD packaging machine new strip transparent paper clip device

GD Packaging Machine The new strip transparent paper holder is mainly installed on the GDX1 and GDX2 packaging units designed by GD Italian company. It is the use of foot pedal pad holder mechanism, pneumatic "top pressure" mechanism and transparent paper strip adjustment mechanism to achieve the purpose of positioning, fastening and adjustment of the transparent paper strip. The new device has three major functions: (1) Conveyor paper transport and positioning functions: The entire roll of transparent paper (hereinafter referred to as paper) is placed on the paper tray (the paper's outer diameter can be adjusted by the bracket height) , The foot pedal bracket lifts the tube paper accurately to the predetermined station. (2) Paper loading and unloading and positioning function: Turn the pneumatic switch to "I", and the left side cone surface toothed positioning plate pushes the paper to the right side step type reference positioning plate under the action of the cylinder, and the paper is accurately The ground is fixed on its station and the foot releases the pedal. After the paper runs out, turn the pneumatic switch to "0" and the left cone-shaped positioning plate leaves the cylinder under the action of the cylinder. At this point, the empty cylinder can be removed. (3) Paper position adjustment function: The rotation adjustment handwheel can move the left bearing seat in the guide groove, and the connected whole paper holder is then moved axially along the bottom guide support shaft to change the paper position.

The main performance indicators:

Diameter of paper tube hole: 75mm;
Outer diameter of cylinder paper: 240-280 mm;
Paper length: 340 mm or 350 mm;
Transparent paper adjustment stroke: 25 mm;
Pneumatic positioning plate travel: 0-50 mm.

Source of information: pack.cn