Hard pack small cigarette transparent paper package shaping device

Patent Name Hard Case Small Package Smoke Transparent Paper Package Shaping Device Patent Applicant Ye Kai Principal Applicant Address 610000 Ye Kai, Inventor of Donggui Village, Chenghua District, Chengdu, Sichuan Application (patent) No. 200420061724.9 Application Date 2004.10.20 Certification Date Approval Announcement No. 2730756 Approved Notice Day 2005.10.05 Instruction CD No. D0540 Main Classification No. B65B11/48 Classification No. B65B11/48; B65B19/22; B65B53/02; B65B61/24 Subdivision Original Application No. A kind of hard pack small cigarette transparent paper packaging shaping device is composed of a cigarette pack side shaper, a face shaper, and upper and lower large surface shaper; the former is installed in front of the smoke outlet of the turret, the upper front of the folder, and the horizontal passage of the cigarette pack On the top guide plate; the middle is installed on both ends of the cigarette bag riser support plate; the latter is installed on the horizontal transport passage of the cigarette pack at the rear of the machine. It is composed of upper, middle and lower flat irons. The upper and lower irons are respectively Mounted on the upper and lower plates of the channel, the middle soldering iron is installed in the upper and lower two cigarette packs inside the channel; the cigarette pack end shaper is structurally identical The devices, which are identical in structure to the side shaper of the cigarette pack, are composed of a cylinder, a flat soldering iron mounted on the end of the piston rod of the cylinder, and a spring mounted on the piston rod outside the cylinder; the advantage of this device is that it does not affect the original packaging. The machine structure can meet the output of the matching packaging machine and greatly improve the appearance quality of the product. Sovereignty item 1, a thin pack of cigarette transparent paper packaging and shaping device, which is composed of a cigarette pack side shaper (6), a face shaper (9) and an upper and a lower face shaper, characterized in that: the bag side shaper ( 6) Installed on the guide plate (5) in front of the horizontal smoke outlet (2) of the packaging machine turret (1), above the folder (4), and on the top of the horizontal transport duct (3) of the cigarette pack; The device (10) is installed at both ends of the pallet (8) of the cigarette bag ascending channel (7); the upper and lower large-surface shaper of the cigarette pack is installed at the tail of the machine, and the cigarette pack of the cigarette bag ascending channel (7) The outlet (9) is connected to a horizontal conveying channel (11), which consists of upper, middle, and lower flat irons (12)(13)(14), and the upper and lower irons (12)(14) are respectively set. On the upper and lower plates of the channel (11), the middle soldering iron (13) is located between the upper and the lower two cigarette packets in the channel (11); wherein the cigarette end face shaper (10) is of the same structure Two devices, which have the same structure as the cigarette shaper (6), are composed of a cylinder (16), a flat iron (19) mounted on the end of the piston rod (17), and a cylinder (16) outside the cylinder. Spring (18) Set on Piston Rod (17) . International Application International Publication Date of Entry into the Country Patent Agency Chengdu Tianyuan Patent Office Agency Address Agent Liu Shiquan