Due to the extreme weather conditions in the summer, the temperature is too high, too dry or too much rain, too humid. Therefore, it has not always been considered a good season for home improvement. In fact, as long as you pay attention to some important matters in summer construction, you can avoid quality problems. Here, the life family Xiaobian specially for you to find the decoration information suitable for summer construction, I hope to help you to install a satisfactory home in this summer!

Home decoration is inseparable from the use of wood products, such as curtain boxes, heating covers, fixed furniture, wooden lines and door and window covers. However, once the temperature and humidity in the room change greatly, some wood products will have problems such as cracking, warping and deformation. In fact, many of the quality problems of home decoration are in the moisture content of wood products.

Whether it is solid wood or artificial board, all wood products contain a certain amount of moisture. Many consumers think that the dryer the wood, the better. In fact, this view is biased. The moisture content of the wood can only be maintained within the normal range to ensure that the quality of the decoration does not occur. Wood and wood materials used in home decoration should generally have a moisture content of about 8%. If the moisture content is too high or too low, it will cause quality problems in the wood in the home decoration.

In order to keep the moisture content of the wood stable, you should pay attention to the following points in the decoration:

1. Use artificial boards more. The texture properties of various artificial boards are much more stable than solid wood materials. Since the solid wood material has texture, when the temperature and humidity change greatly, cracking, warping and deformation will inevitably occur. The wood-based panel is used to break down the wood into wood chips or wood pulp, and then re-form the wood. Because the original physical structure of the wood is broken, the "deformation" of the artificial board is much smaller than that of the solid wood when the temperature and humidity change greatly.

2, construction attention to details. In the home decoration, the key to the quality of the wood is the construction, especially the details: after all the wood products are installed, they should be painted once. This layer of paint, called "top coat", not only protects wood products, but also protects against moisture and maintains the normal moisture content of the wood; it cannot be drenched in the binder. At present, in the home decoration, white latex is generally used as a binder for wood products. Some workers exchange water in white latex in order to cut corners. This not only reduces the strength of the binder, but also causes quality problems when the wood product absorbs moisture; all wood is placed for a few days. After you buy the wood for decoration, it is best to put it in the decoration site for a few days before using it. The purpose of this is to make the moisture content of the wood close to the level of the new home.

3, be careful when purchasing materials. When you purchase wood for decoration, it is impossible to determine the moisture content of the wood by eye or hand touch. Therefore, some people lamented: If only by visual inspection, the moisture content of wood can be described as "the fairy is difficult to distinguish." In fact, there are some tips to help you determine if the moisture content of the wood is acceptable. Generally, the characteristics of dry wood are obvious, the weight is obviously reduced, the hand feel is not cool, the tapping is crisp, the “squeaky” sounds when the planer is pushed, the shavings are heated, and the surface is light. The wood with high water content is heavier, feels cold, and is not brittle when pushing the plane, even shaving. This type of wood cannot be used.

EVA Camera Case: made with thick and hard odorless EVA material, waterproof, lightweight and durable, ideal case for storage and carrying cameras and  accessories

we can handle all stages of your needs for EVA bag and case - from research and design, sampling, mass production, packaging and  logistics, We make it worry free and easy to do business.

Advantages with us,

1, More than ten years of experience in designing and manufacturing.

2, Competitive price and On-time delivery

3, Quality is our number one priority

4, Great After-sale services

Porduct	Custom Design EVA Camera Case/BAG
Surface fabric	Polyster	Fabric available: 210D,600D,900D,1200D,1680D polyeste, PU, PVC etc
Body	EVA	4mm,5mm,6mm,70-75 degree hardness EVA
Lining	knitted fabric	velvet lining,faric lining, or others
Design	inside with mesh pocket and cut foam	inside with mesh pocket, elastic, cut foam, molded foam ok
Size	Custom	we can make mould so any size is ok
Color	black	pantone color is welcome
Type(Usage)	Storage,and carrying	promotion, packing, protection
Delivery time	usually 30days for running an order	based on quantity, can be discussed
MOQ	500pcs	can be discussed
Sample	with exsiting size: free and 3days with new mould: need mould cost and about 5days

1 Custom fabric and lining

2 custom logo design

3 custom inside design

4 Production 

EVA Camera Case

EVA Camera Case,Custom Design EVA Camera Case,EVA Camera Bag,Gopro Camera Case

Dongguan Topreal bag&case., Ltd. , https://www.toprealcase.com