![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Instruction manual of electric thermostat incubator
1. Product introduction and scope of application:
The series of incubators produced by our company are suitable for sciences such as industrial and mining enterprises, medical and health, biochemistry, agricultural science, etc.
The research department conducts cultivation experiments in bacterial cultivation, breeding, fermentation, etc.
Second, the appearance diagram:
3. Main technical data:
Model studio size temperature range voltage power temperature fluctuation uniformity
(℃) (V) (KW between (℃) (℃)
) (min)
DH-250 250 × 250 × 250 Room temperature + 5 ~ 65 220 ± 10% 0.2 ≤50 ± 0.5 1%
DH-360 420 × 360 × 360 0.3
DH-420 500 × 420 × 420 0.4
DH-500 600 × 500 × 500 0.4
DH-600 700 × 600 × 600 0.6
Product model description: B: stainless steel liner (without B, high-quality galvanized sheet liner)
A: Smart meter (no A is a pointer meter)
4. Structure Overview:
DH series incubator, the shell is made of high-quality cold-rolled steel plate, the surface is treated by electrostatic spraying process. studio
It is made of high-quality imported stainless steel plate or cold-rolled galvanized steel plate, and treated by anti-corrosion technology.
Looking through the window, you can clearly observe the cultivated objects in the working room. The high temperature resistant silicon rubber seal is adopted between the working room and the door of the box, opening and closing
Convenient and well sealed. The power switch and control instrument are all installed in the control panel on the door, which is convenient for adjustment and control.
The heater is installed at the bottom of the cabinet and the temperature control instrument constitutes the heating system.
5. How to use:
1. Installation and commissioning
(1) Place the instrument on a platform or workbench in a dry place indoors, and keep it in a horizontal state.
Install sockets and leakage protection switches in the road, and install grounding wires.
(2) Put the articles to be cultivated into the box, close the door, turn on the power, turn on the power switch, the instrument displays
Display the temperature of the working room, then set the temperature, the heating in the working room starts, the green light on the temperature control meter lights up
It shows that the power is on, the red light is on when the power is off, and the red and green lights are on alternately to enter the constant temperature state
About 30 minutes after the constant temperature state, the set temperature is basically the same as the displayed temperature.
2. How to use the meter
XMTD-700 / 7000: (Applicable to
(DH-250 type)
(1) Function keys
(2) Minus key-auto tuning
(3) Add key-power-on time
(4) Main control output indicator
(5) Auto-tuning indicator
(6) Upper limit alarm indicator
(7) The measured value refers to the display window
(8) Set value display window
From: http: //
Stainless Steel Ashtray made of high quality material. Light weight, easy to carry, suitable for outdoor or indoor. Narrow opening for windproof. A cigarette holder welded to the inside of the Lid that is very convenient. Our Stainless Steel Ashtray Bin, Stainless Steel Tabletop Ashtray and Stainless Steel Cigarette Ashtray are suitable for bar, bedroom, living room, garden, outdoor, etc. We guarantee quality and service. Welcome to inquire, all factory direct sales, to cooperate with you wholeheartedly! Look forward to your cooperation!
Stainless Steel Ashtray
Stainless Steel Ashtray Bin,Stainless Steel Tabletop Ashtray,Stainless Steel Cigarette Ashtray
Shantou HLCY Co., Ltd. , https://www.sthlcy.com