![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
respected user:
Thank you very much for choosing to use the fully automatic new artificial climate incubator produced by our company! In order to facilitate your use, please be sure to read the manual of this product carefully, operate and maintain it according to its requirements, and keep this manual properly. From the day you buy this product, "ZTE" after-sales service will be with you closely, no matter what problems you encounter during use, please contact us in time, we will do our best to serve you
1. Safety Tips
The matters recorded here are extremely important and must be strictly observed! Danger! (It may constitute a reminder of death or injury)
1. This equipment must be reliably grounded. Improper grounding can cause electric shock or fire.
2. Make sure that the power plug is firmly inserted on the power board: if the plug is not inserted tightly, it may cause electric shock, overheating or fire.
3. Do not pull out the power plug while the machine is running. Otherwise, electric shock or fire may occur due to overheating.
4. Do not damage the power cord or use an unspecified power cord. Otherwise, electric shock or fire may occur.
5. Do not disconnect the power cord and use a long power cord in the middle. Otherwise, electric shock or fire may occur due to overheating.
6. Do not plug or unplug the power cord with wet hands. Otherwise, there is a risk of electric shock.
7. Do not insert fingers, sticks or other foreign objects into the air supply or air inlet. If the internal fan is running at high speed, if the rotating fan is touched, it will cause damage to the device or injury to the human body.
8. If there is an abnormal state (burnt smell, etc.), immediately unplug the power plug to stop the device, or use a circuit breaker to disconnect the power supply. The abnormal state continues, which will cause overheating and cause fire or electric shock.
9. Do not repair without authorization. Incorrect repairs can cause fire or electric shock. Important! (It may constitute a reminder of injury or property damage)
1. You must read and understand this manual before use. Because, incorrect use will cause damage to the equipment or abnormal operation of the equipment.
2. The equipment should use an independent power socket.
3. Do not pull the plug by pulling the power cord. Pulling the power cord can cause the cord to overheat or fire
4. Please confirm the power supply voltage at the location before use. If the power supply voltage does not meet the requirements, the device may be damaged or the device may not work normally.
5. When the device moves in parallel, the tilt angle in either direction should be less than 45 degrees. Otherwise, the refrigeration compressor in the equipment may be damaged or the refrigeration performance may be abnormal.
6. The equipment should stand vertically for 3 hours after installation. Otherwise, the refrigeration compressor in the equipment may be damaged or the refrigeration performance may be abnormal.
7. In one of the following situations, the power plug of this equipment must be unplugged:
1) When opening the power box door of the device. Turning on the power box with power on may cause electric shock.
2) When replacing the fuse. Replacement of the fuse with power on can easily cause electric shock.
3) When the equipment fails and cannot be used normally. To prevent further damage to the equipment caused by accidental start-up or accidental injury to personnel.
4) When the device is stopped for a long time. Dust accumulated on the power plug may also cause electrical leakage and fire.
5) When moving equipment. Moving equipment with electricity can easily cause electric shock.
Note (there may be tips that affect the life of the device and the normal use of the device)
1. Opening and closing the equipment door by gravity can easily cause damage.
2. The equipment should be placed on a hard and firm surface and ensure its horizontal state
3. The distance between the device and the wall must be about 20cm.
4. Do not put the device near the stove or in direct sunlight.
5. If the equipment has a cooling function and needs continuous cooling, it must be heated and moisturized once every 10 days.
6. To ensure the cooling effect, the condenser should be cleaned once a month.
7. The surface of the equipment shall not be in contact with volatile chemicals such as gasoline and banana water.
8. The equipment box door is not easy to open frequently and randomly, otherwise it will affect the constant temperature effect.
9. Keep the inside and outside of the box clean, and regularly clean up debris and stains.
2. Equipment Introduction
ZTE series incubator is a new type of artificial incubator newly developed by our company. This series of products has a streamlined luxury machine shape with rich aesthetic design concepts, a human-machine dialogue operation interface that visualizes design thinking, and an environmental scanning micro-processing chip with high-precision control capabilities for equipment temperature and other indicators. The RGX series of biochemical incubators reflect the distinctive professional manufacturing taste, the continuous product design creativity, the ubiquitous expression of the humanistic pursuit of the artistic conception ... all these will bring you high-tech experiments At the same time, the high efficiency and high quality of the work in the room can get the fun brought by art and technology. This equipment is widely used in medical and health, agricultural scientific research, environmental protection and other research application fields, for plant seed germination, nursery, plant cycle cultivation, microbial culture, insect and small animal breeding experiments.
3. Main features
?? Highly responsive thermal sensor and environmental scanning microprocessor chip, forming high-precision air temperature control characteristics
?? Reasonable design of air duct structure, breeze air circulation design. Ensure good temperature uniformity.
?? The unique clean design of the geometric cavity guarantees the active and perfect protection of the sample.
?? The inner tank is made of stainless steel, and the three-sided tempered glass door.
?? With power failure recovery function, the external power supply calls again, the device can automatically start fast constant temperature.
?? LED clearly shows the running parameters.
?? Has a memory function to avoid repeated operation settings.
?? With timer function.
?? Equipped with 2 band control mode, effectively solve the conversion of different temperatures.
?? Aesthetic design concept, luxurious and elegant overall shape.
From:
Hanging Shoe Rack is a home necessity that is used to store shoes for easy management. It takes up vertical space that can save more space than a regular shoe rack. You will not worry about all kind of your shoes in a mess. Now you can easily store and organize all your shoes, heels, sandals, and sneakers in one easy to access place. Compact-sized shoe rack maximizes minimal storage space.Simply place the Over The Door Rack on the backside of any closet or storage door for access, storage, and organization of your favorite shoes. Also, it is easy to assemble and clean. Do not hesitate to buy one.
Hanging Shoe Rack
Hanging Shoe Rack,Hanging Shoe Storage,Plastic Shoe Rack
Xinhui Mingcheng Hardware Mamufacture Limited of Jiangmen City , https://www.gd-jmmc.com