![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The needs of life, printing more and more thin paper, sometimes encounter printing 40 grams and below of thin paper, printing folio and other large format thin paper need to pay attention to the following issues.
1. Knock on paper. Tissue paper is soft and breathable, which makes it difficult to feed. First of all, knock on the mouth of the fan to form a fan shape, knock on the side gauge into a figure of eight, the length of the knock marks can be about 20cm, the knocking force should be heavier, the knock marks should be smaller at the trailing point, and the spacing should be smaller to increase the stress. Due to the presence of knock marks, do not put too much paper on the stacking table, so as not to cause the stack of paper to be uneven and difficult to convey.
2. Paper feeding part. The mouth of the paper stack should be lower than the top of the front teeth by about 1cm. The loose paper nozzle is adjusted to about 10 sheets on the surface of the loose paper stack. The air volume is adjusted to be smaller. The paper separation nozzle is about 8mm away from the paper surface. The nozzle rubber The ring should be replaced with a thin ring with a small diameter. Adjust the length of the presser foot lever to increase the distance between the paper stacking surface and the paper separation nozzle to avoid double sheets. The paper feed nozzle is about 8mm away from the paper surface. Decrease the pressure of the pressure roller. The pressure roller should be parallel to the middle of the belt and keep the pressure consistent. Reduce the pressure on the side gauge to avoid the thin paper feeding.
3. In the imprinting part, when printing thin paper, remove the normal pad paper of the plate cylinder and replace it with the pad paper of the same thickness as the printed thin paper. At the same time, the rubber roller pad is filled with the same thin paper. At this time, the plate and the inking roller are The pressure between them becomes smaller, which appropriately reduces the amount of ink transfer. Slightly increased the pressure between the printing plate and the rubber, rubber and the impression cylinder, which is conducive to the transfer of graphics.
4. Tighten the teeth and collect the paper. When the paper enters the imprint, the teeth on the delivery tooth row, roller, and delivery chain row should be tightened to increase the bite force to avoid the thin paper being pasted on the blanket due to its thinness, softness, low density, and low paper tension. Properly reduce the amount of paper blowing, avoid paper floating, and ensure that the paper is collected.
2D-Double Wire Panel Mesh Fence
Double wire mesh fence is a type of fencing that consists of two horizontal wires that are welded together with a vertical wire in between. The fence is made of high-quality steel wire that is coated with PVC or galvanized to prevent rust and corrosion. The double wire mesh fence is designed to provide a high level of security and protection for various applications, including commercial, industrial, and residential properties.
The double wire mesh fence is commonly used for perimeter security, sports fields, playgrounds, and other areas where safety and security are essential. The fence is also popular for its aesthetic appeal, as it can be customized with different colors and designs to match the surrounding environment. Overall, the double wire mesh fence is a reliable and versatile fencing solution that provides strong and durable protection for any property.
2D-Double Wire Panel Mesh Fence,Double Wire Mesh Panel Fence,Double Wire Fence Panel,Double Wire Mesh Fence
HEBEI DOUDOU METAL FENCE PRODUCTS CO.,LTD. , https://www.ddfencefencing.com