Suspended and lowered ropes

The technique of descending to a climbing ground along a fixed climbing rope is called hanging down. In the past, the method used was called "strapless shoulders." It is a method of winding a climbing rope around a shoulder to cause braking; however, most of the eight-character rings have recently become the mainstream.

When fixing a climbing rope, simply place the rope directly on the trunk in the descending position. If there is no suitable tree there, you can use climbing nails as a support point and set the rope trap on the climbing rope; however, at this time, it is important to check if the falling support point is firm. Usually, climbing ropes are used in half, but if the distance is too long, they can be used in combination with two ropes. And do not forget to fix the ropes.

Link two climbing ropes

When the descent distance is too long, you can use a double-fisherman knot to connect two ropes.

Rope head treatment method

The rope hanging down must be made of double knots or single knots.

Stop falling and re-climbing When the rope is stopped or re-climbed without reaching the bottom, you can make a rope loop on the rope to make a loop, and then set the loop to the safety harness. Once the Prussian knot is exerted, the knot will become tighter and tighter on the rope; when the force is not applied, the knot can be freely adjusted.