Use a heat aging test chamber to pay attention to three "regular" not less

In order to ensure the service life of the heat aging test chamber, the following three measures should be taken frequently in the use of the heat aging test chamber.

First, regularly clean the dirt inside the box.

Dirt and foreign matter in the test area can affect the results of the test, so it is necessary to clean the test area before each test. First open the test chamber door and clean the inner box wall, hanging strips, etc. with a soft cloth.

Second, regularly clean the distribution cabinet dust

Accumulation of dust in the heat aging test box distribution cabinet and water circuit room can cause unnecessary failure. Therefore, it is necessary to clean the power distribution cabinet and water circuit regularly. Before cleaning the power distribution cabinet, you must turn off the main power switch. After opening the cover of the power distribution cabinet, use the vacuum cleaner or compressed air spray gun to remove the dust from the power distribution cabinet. Follow the cleaning sequence from top to bottom to prevent repeated cleaning. After cleaning, The cover of the power distribution cabinet is installed.

Third, regular detection of leakage protectors

In order to ensure the normal operation of the circuit breaker and leakage protection switch, please check regularly. Inspection method: While pushing the relay, click the test button. If the circuit breaker is tripped, the protection action is normal. Otherwise, it is not normal. Please contact the manufacturer as soon as possible.

Ecovero Rayon Dyeing Printing Fabric

Dress Recycled Rayon Fabric,Dyeing Printing Rayon Fabric,Custom Ecovero Printing Fabric,Ecovero Rayon Printing Fabric

Zhejiangxingyuanda Textile co.,ltd , https://www.xingyuandatex.com