Constant temperature and humidity test box transfer three steps

As the company continues to grow, environmental laboratories may need to relocate from time to time. When it comes to moving a constant temperature and humidity test chamber, it's essential to follow specific procedures to ensure the equipment remains undamaged. There are three key steps that should be taken during the relocation process. First, the test chamber must not be tilted more than 30 degrees during transportation. This is because the refrigeration system operates similarly to a refrigerator, and excessive tilting can cause refrigerant and compressor oil to escape, potentially damaging the compressor. This issue is a common problem in the industry, so it's crucial to handle the unit with care. Second, the chamber should be properly packed using soft materials like foam or sponge to prevent any surface damage. Additionally, all casters should be secured to avoid movement during transit. Once the unit arrives at the new location, it should not be used immediately. The internal refrigerant and oil may have been disturbed during transport, so it’s recommended to let the unit rest in a horizontal position for at least 12 hours before powering it on. Third, after the relocation, if the device does not turn on, it might be due to the phase sequence protection switch. These units typically require only two of the three-phase wires to operate. In such cases, adjusting the wiring configuration could resolve the issue. By following these three steps, the transfer of a constant-temperature and humidity test chamber can be done safely and efficiently. This guide was prepared by the Yashilin Technology Department. Please credit the source when sharing this information.

Chain Link Mesh Fence

Chain link fence is a type of fencing made from galvanized or coated steel wire that is woven into a diamond-shaped mesh pattern. It is a popular choice for residential, commercial, and industrial applications because it is durable, affordable, and requires little maintenance.

Chain link fence is a type of fence made of steel wires that are woven together to form a diamond-shaped pattern. It is a popular fencing option due to its durability, affordability, and low maintenance requirements.

Chain link fence is a versatile and durable fencing option that can be used for a variety of applications.

Chain Link Mesh Fence,Chain Link Mesh Fence Panel,Privacy Mesh For Chain Link Fence,Chain Link Fence

HEBEI DOUDOU METAL FENCE PRODUCTS CO.,LTD. , https://www.security-fencing.com