How to self-test with a thermal label printer

To perform a self-test on the printer, follow these simple steps:

1. Load 80 mm wide thermal paper into the printer. Make sure the paper is not already loaded. If you're unsure, refer to the image below for guidance.

2. Press and hold the "Exit" button. Do not release it yet. Then, turn on the printer. After about 2 to 3 seconds, let go of the "Feed" button. The printer will automatically print a self-test page.

For visual assistance, you can watch the video provided below.

This process is straightforward and helps ensure that your printer is functioning properly. If you encounter any issues during the test, check the paper loading again or consult the user manual for further support.