![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Rat Protein Kinase C (PKC) Quantitative Detection Kit (ELISA)
user's Guide
[Rat Protein Kinase C (PKC) Elisa Kit Kit Name]
Rat Protein Kinase C (PKC) Quantitative Detection Kit (ELISA)
[Rat Protein Kinase C (PKC) Elisa Kit Kit Usage]
Quantitative detection of protein kinase C (PKC) in rat serum, plasma and related liquid samples.
[Rat Protein Kinase C (PKC) Elisa kit detection principle]
This kit uses double-antibody two-step sandwich enzyme-linked immunosorbent assay (ELISA). Add the standard and the test sample to the pre-coated rat protein kinase C (PKC) monoclonal antibody transparent enzyme label coated plate. After incubating for a sufficient time, wash to remove unbound components, and then add the enzyme label working solution. After sufficient incubation time, wash to remove unbound components. Substrates A and B are added in sequence. The substrate (TMB) is converted into a blue product catalyzed by horseradish peroxidase (HRP), which turns yellow under the action of an acid. The concentration of C (PKC) is positively correlated. The OD value is measured at a wavelength of 450 nm. Based on the OD value of the standard and the sample, the content of rat protein kinase C (PKC) in the sample is calculated.
[Composition of Rat Protein Kinase C (PKC) Elisa Kit]
1
Enzyme coated plate
12 holes × 8
7
Developer A liquid
6mL
2
Standard
0.3mL × 6 tubes
8
Developer B liquid
6mL
3
20 times concentrated washing liquid
25mL
9
Stop solution
6mL
4
Sample diluent
6mL
10
Instructions
1 serving
5
Special diluent
6mL
11
Sealing film
2 sheets
6
Enzyme reagent
6mL
12
sealed bag
1
Remarks: The concentration of standard products (No. 1 → No. 6) is: 8, 4, 2, 1, 0.5, 0.25 pmol / L
[Rat Protein Kinase C (PKC) Elisa kit required but not provided reagents and equipment]
1. 37 ℃ thermostat
2. Standard specification microplate reader
3. Precision pipettes and disposable tips
4. Distilled water
5. Disposable test tubes
6. Absorbent paper
[Procedures of rat protein kinase C (PKC) Elisa kit]
1. Preparation: Remove the reagent kit from the refrigerator and re-equilibrate at room temperature for 30 minutes.
2. Mixing solution: dilute the 20-fold concentrated washing solution with distilled water to the original one.
3. Add standard products and samples to be tested: take a sufficient number of enzyme-coated plates and fix them to the frame. Set up standard wells, sample wells to be tested and blank control wells, record the positions of each well in the standard wells. Add 50μL of standard product; first add 10μL of sample to be tested, and then add 40μL of sample diluent (that is, the sample is diluted 5 times); blank control well is not added.
4. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.
5. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with the washing solution, let stand for 1min, shake off the washing solution, pat dry on the absorbent paper, repeat the washing 4 times (you can also use the washing machine to press Instructions for washing the board).
6. Add enzyme-labeled working solution: add 50μL of enzyme-labeled working solution to each well, without adding blank control wells.
7. Incubation: Incubate in a 37 ° C water bath or thermostat for 30 minutes.
8. Wash the plate: discard the liquid, pat dry on the absorbent paper, fill each hole with washing liquid, let stand for 1min, shake off the washing liquid, pat dry on the absorbent paper, repeat the plate washing 4 times (you can also use the washing machine to press Instructions for washing the board).
9. Color development: add 50μL of developer A solution to each well, and then add 50μL of developer B solution, mix for 30s with a plate mixer (or gently shake for 30s by hand), and avoid color development at 37 ℃ for 15min .
10. Termination: Remove the enzyme labeling plate and add 50μL of stop solution to each well to stop the reaction (the color changes from blue to yellow).
11. Determination: Zero the blank holes, and within 15 minutes after termination, measure the absorbance (OD value) of each well with a wavelength of 450 nm.
12. Calculation: According to the concentration of the standard product and the corresponding OD value, calculate the linear regression equation of the standard curve, and then calculate the corresponding sample concentration on the regression equation according to the OD value of the sample. You can also use various application software to Calculation. The final concentration is the actual measured concentration times the dilution factor.
[Rat Protein Kinase C (PKC) Elisa kit sample requirements]
1. The sample cannot contain sodium azide (NaN3) because sodium azide (NaN3) is an inhibitor of horseradish peroxidase (HRP).
2. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.
3. The sample should be fully centrifuged, without hemolysis and particles.
ã€Precautions for Rat Protein Kinase C (PKC) Elisa Kit】
1. The experiment is carried out in strict accordance with the instructions, and the result of the experiment must be determined by the reading of the microplate reader.
2. If the enzyme-labeled coated board is not used up after opening, it should be put into a sealed bag and added with desiccant immediately.
3. It is recommended that all standards, samples and blank controls be tested in duplicate, and the average value is taken to reduce the experimental error.
4. Keep in mind that the sample has been diluted 5 times. The calculation result is multiplied by 5 to obtain the actual concentration of the sample.
5. The quantitative range of this kit is 0.25-8pmol / L. If it exceeds this range, it is calculated by the extension of the standard curve. ), Multiplied by the total dilution factor is the final concentration of the sample.
6. If the color is too light, the substrate incubation time can be extended properly.
7. In order to avoid cross-contamination, the tips, samples and blank controls should be replaced with a new one for each addition; the common components such as enzyme working solution, sample diluent and substrate should be cantilevered, and they should not touch the microwells. ; Do not reuse the sealing film.
8. The kits are used within the warranty period, and different batches of reagents should not be mixed.
9. Substrate B is sensitive to light and avoid prolonged exposure to light.
[Rat protein kinase C (PKC) Elisa kit operating procedures summary]
Prepare reagents, samples and standards
Add prepared samples and standards, and react at 37 ℃ for 30 minutes
Wash the plate 4 times, add the enzyme reagent, and react at 37 ℃ for 30 minutes
Wash the plate 4 times, add color developing solutions A and B, and develop at 37 ℃ for 15 minutes
Add stop solution
Read OD value within 15 minutes
Calculation
ã€Range of detection of rat protein kinase C (PKC) Elisa kit】
0.25pmol / L-8 pmol/L
[Specification of rat protein kinase C (PKC) Elisa kit]
96 servings / box
ã€Storage of Rat Protein Kinase C (PKC) Elisa Kit】
Store at 2-8 ℃, protected from light and moisture.
ã€Validity of Rat Protein Kinase C (PKC) Elisa Kit】
6 months
1)Unique traditional Barber Chair of salon furniture around the world
2)Every parts is made of cast leather and steel, good quality and smooth without any distortion or blister.
3)Adjustable height, can be turned around to 360 degrees.
4)top grade design and high quality, it is not just barber chair, it is more than an artwork
5) Please feel free to drop us an email .
6) Surface treatment: electrostatic spray, color can be set based on customer requirements
7) Strong enough, even you can stand on the footrest.
8) Whole chair can be sleep flat, with footres support.
We export in beauty and salon equipment has more than ten years of experience. We are a leading manufacturer, we export to abroad as follow:
Electric Facial Bed, Hydraulic Facial Bed, wood Facial Bed , Massage Table, facial bed, facial massage chair, Shampoo Chair , barber chair, styling chair, child chair, waiting chair, dressing mirror, reception table,beauty chair,styling chair,master stool,spa stool,salon stool, pedicure spa, Nail Table , massage chair, master chair, trolley, Bed Cover , footstep and cushion.
Beauty Master Chair,Adjustable Master Chair,Salon Master Chair,Leather Master Chair
ChaoHui Beauty Salon Equipment Co., Ltd. , https://www.facialbed.nl