Maintenance and troubleshooting of the ion meter

1. Routine maintenance of the ion meter a. The instrument must operate within an ambient temperature range of 0 to 40°C, with a relative humidity of less than 85% RH. The power supply should be AC: 220 V ± 22 V, and the frequency should be 50 Hz ± 0.5 Hz. Ensure that the power source is stable and free from voltage fluctuations to prevent damage to the internal components. b. Place the instrument in a well-ventilated and dry area to avoid moisture buildup, which can affect its performance and longevity. Keep the input socket clean and protected from dust and water vapor. When the electrode is not in use, always insert the Q9 short-circuit plug to prevent contamination and ensure proper electrical isolation. c. For detailed electrode maintenance, refer to the electrode's user manual. Regular cleaning and calibration are essential to maintain accuracy and extend the life of the electrode. Avoid using abrasive materials or harsh chemicals when cleaning the electrode, as they may damage the sensitive sensing surface. It is also recommended to store the electrode in a suitable storage solution when not in use. d. Periodically check all cables and connections for signs of wear or damage. If any issues are found, replace them immediately to avoid potential malfunctions. Additionally, keep the instrument’s exterior clean by wiping it with a soft, dry cloth. Avoid using excessive force or liquid during cleaning, as this could lead to internal damage. e. Before each use, verify that the instrument is properly calibrated and functioning correctly. Follow the manufacturer’s guidelines for calibration procedures and record all calibration results for reference. This helps ensure consistent and reliable measurement results over time.

Airbrush Spray Pen

Airbrush Spray Pen,Spray Art Airbrush Pen Set,Crayola Spray Pens,Airbrush Painting for Beginners,Electric Airbrush Gun

Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com