![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The terminal tensile testing machine has the characteristics of high automation, large processing capacity and reliable operation. It is the most popular test instrument in the mechanical testing machine. Used to test various materials, such as wire and cable, plastic rubber, metal hardware, mold shell, packaging materials, self-adhesive materials, textile printing, etc., through a certain degree of mechanical tensile test after destructive testing, to judge the material The strength value of the force.
The operation process of the terminal tensile testing machine:
1. Put the wire part of one end of each harness terminal into the clamp of the left clamp, and rotate the handle to clamp the wire part (the harness terminal has been pressed)
2. Place the other end of the harness terminal into the clamp of the right clamp, and rotate the handle to keep the end of the harness terminal stuck in the middle.
3. Use the M4 Allen key to align the center of the left clamp to the center of the right clamp.
4. If the digital display push-pull timing is used, turn on the power, and wait until the LCD display shows zero, then you can install the pointer push-pull force timing, press the toggle button to return the pointer to zero.
5. Rotate the handle of the body to move the left clamp to the left and the right clamp to clamp the terminal.
The above is the general knowledge about the operation of the terminal tensile testing machine. There are many basic knowledge about the installation, debugging and use of the terminal tensile testing machine. Welcome to consult.
"big guava""red guava""sweet guava"
Bossgoo Information Technology Co., Ltd , https://www.bossgoodemo.com