The secret of the face of the pie face changing the face of the goose egg

Although the round face is very cute, it gives a generous feeling. If you want to modify this shortcoming, you should use the inverted triangle to repair the capacity and straighten it, and the face will look slender. This inverted triangle contour modification not only makes the face slender, but also has a slim visual effect.

Contour decoration belongs to the base, please use the foundation → repair capacity → concealer → honey powder. When performing the contour modification Step, be sure to prepare two products, a dark concealer for repairing and a light concealer for lighting (the color of the product is based on your skin tone).

Step 1

A bright inverted triangle is drawn in the center of the forehead with a bright color. Starting from the center of the brow, the wider the width, the longer the forehead looks, and the longer the face will be.

Step 2

From the center of the brow down to the nose, brush the bright color. When you brush it, you should adjust it according to the width of your nose. The narrow nose is a little thinner, and the person with a wide nose is thicker.

Step 3

The chin and the forehead must draw an inverted triangle that is sharper and downward. The position of the lip peak is also depicted as an icon.

Step 4

In the middle of the cheeks, find out from the end of the eyebrow, the end of the eye to the corner of the mouth, the height of the repair can not exceed this range, if it exceeds this range, the face will look wider.

Step 5

Use the dark color to repair the chin from the cheekbones and draw a straight stroke. The higher the slope, the more it feels thin. Please pay attention not to be too thick.

Step 6

Brush the dark color on the forehead and the top hairline. Repairing the face on both sides of the forehead will make it look narrower, highlighting the area that was just highlighted (Step1) and presenting a smooth, bright feel.

Step 7

Now it's time to push the area that just draws the mark. Use a sponge to gently pat the position where you have just painted the bright color (refer to Step1).

Step 8

The bright color on the bridge of the nose (refer to Step 2) is patted gently from top to bottom, taking care not to have a sense of line.

Step 9

Draw on the bright color of the chin (refer to Step3) and take care to avoid mixing with the lines of the repairing capacity.

Step 10

The bright color of the cheeks (refer to Step4) is taken evenly, taking care not to mix with the repairing capacity, to pat and not to have a sense of boundaries.

Step 11

Brush the dark chin line (see Step 5) and use a sponge to pat the inside of the face, and the position of the forehead (see Step 6) is naturally connected, and the boundary is naturally eliminated.