How do I change the IP address of my POS thermal printer?

1. The printer is directly connected to the router. Make sure the printer is turned on, and connect the network cable from the router to the printer's network port. Install the POS80 driver, then add a TCP/IP port by entering the printer's IP address. Click "Next" and "Finish" to complete the setup. Select the newly added port and apply it to ensure proper connectivity. a. To view the printer's IP address, check the self-test page. This page usually displays the current network settings of the printer, including its IP address. b. To find the computer's IP address and default gateway, go to the Network and Sharing Center. If the information is not visible, click on "Properties" and navigate to the "Internet Protocol Version 4 (TCP/IPv4)" settings to view the details. After locating the computer's IP address, you can enter the printer's IP address into an Internet Explorer browser to access its configuration interface. Once there, you can modify the printer's IP address if needed. After saving the changes, the printer can be added to the local area network (LAN) for communication with the computer. Before making any changes to the IP address, it's important to check for potential conflicts with other devices on the network. To do this, open the Command Prompt by clicking "Start" and typing "CMD." Then, type "ping" followed by the IP address and press Enter. This will test whether the IP address is already in use by another device. If the printer is connected directly to the computer, ensure that the first three segments of the printer's IP address match those of the computer. This ensures they are on the same subnet and can communicate properly. You can view both IP addresses through their respective system settings or the printer's self-test page. Additionally, when modifying the printer's IP address, make sure to save the changes correctly and restart the printer if necessary. Once configured, the printer should appear as a network device and be accessible from the computer. Always double-check the connection and settings to avoid any potential issues.

Contemporary Beds

Contemporary Beds,Microfiber Soft Bed,Fabric Soft Bed,Frame Fabric Soft Bed

INCHEE FURNITURE CO.,LTD , https://www.inchee.com

Posted on