Molding Causes and Handling Measures of Exported Wooden Pallets

First, the reasons for export moldy wooden tray
1. The wood itself is a hotbed of microorganisms. The wood fiber contains protein, starch, oil, cellulose and so on.
2, the high temperature in the summer, mold reproduction speed, so less mildew in winter.
3, the humidity of the wood itself, the wood is less moldy in the dry condition, easy to mold when the humidity is high.
4, the surrounding environment humidity, the environment is humid, suitable for mold growth.
5, the surrounding air mobility, closed environment more rapid growth of anaerobic bacteria easier to cause moldy, good air circulation will be better.

Second, the main processing methods:
1. Drying: This method can solve most problems, but it is costly and expensive, and it easily leads to cracks in the wood. However, special applications such as sealed packaging, high humidity in warehouses, and export in the case of hot and humid environments at sea do not work. Now. Air drying (drying naturally) costs less but takes longer.
2, fumigation: This method is mainly for the export of wood packaging insecticide, and the shorter period of validity. Many mistakenly thought it was mildew. In fact, it had no effect on mold control.
3, heat treatment: to have specialized equipment, and high processing costs, can reduce the moisture content of wood, but can not solve the fundamental problem.
4. Anti-corrosion: This method is mainly used for outdoor landscape wood or furniture wood processing. The commonly used medicines are ACQ and CCA. The vacuum high pressure method is used to spray the medicine into the wood. Generally, the penetration is relatively thick, mainly the insect-killing bacteria. And so on, but its effect on mold is not very good, and it is often seen everywhere.
5, mildew: the use of professional wood anti-mold agent to deal with it, you can use rapid soaking or spray brush and other methods, but the cost of anti-mold agent is high, and the operator and the working environment is likely to cause injury and pollution.
6. Moisture-preventing agent: Internationally, container desiccant (container desiccant) is commonly used to prevent moisture, and to prevent moisture infiltration, the most absorbent calcium chloride desiccant can be placed in the container, and then the container is checked before packing. Whether it has been rinsed with water, did not take a dry treatment.