![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The saturator temperature value is controlled by the main control board and is adjusted according to different ambient temperature and room temperature. The saturator is a pressurized container with a pressure resistance of ≥6Kg. It is made of stainless steel. Each saturator is equipped with 2 electric heating tubes, one of which is spare for easy maintenance. Deionized water is installed in the cylinder, and there is a water level gauge/inlet valve/exhaust valve/drain valve/sensor/test hole. The three-way joint is connected to the pipe leading to the nozzle and connected to the pressure gauge at one end. Use distilled water or deionized water so that the air entering the nozzle is close to the test temperature in the chamber, and the clean and humid air.
The piping material of the gas supply system is a PP high pressure pipe from the compressor to the air reservoir. According to the trend, the outer diameter is lowered step by step, and a pipe before entering the nozzle is a high quality silicone rubber tube. All pipes exposed to the air and pipes buried in the outer frame need to be filled with different insulation materials to replenish the water in the saturator: since the air flowing through the saturator is hot and humid, it will take away a part of the water vapor. Time work will continuously consume water, and it is necessary to replenish water regularly. In addition, due to the pressure in the saturator and the inability to enter the water, the gas supply must be temporarily stopped and the water inflow is very slow. In this case, it is necessary to: Set two solenoid valves on the saturator. One of them is a water inlet solenoid valve, and the other is an air outlet (ventilation) solenoid valve. When the water enters, the two solenoid valves are simultaneously opened.
In order to get a more comprehensive understanding of the salt spray laboratory equipment, please continue to pay attention to this site, Shanghai Jianhu Instrument Equipment Co., Ltd. will always update more product knowledge for everyone to read.
Outdoor Wooden Potting Bench,Garden Table with Sink & Storage for Gardening
Perfect Assistant for Gardening
Wooden potting bench is a great helper for your gardening tasks. Our garden potting table constructed with a top shelf (an excellent place to put small plants), a work tabletop ( can work here), a bottom shelf ( can put big pots and plants), a drawer ( keep your gardening tools tidy and easy to take out), four side hooks (suitable for hanging the pipe and rope). Excellent gardening table to keep your gardening tools organized and make your garden, patio, backyard more beautiful and tidy. Openable Roof: The Bolt on the side could be used to fix the top keep open, and the size of the vents can be controlled by holding the screws in different rods position, providing a healthy ventilation system to your plants in different weather.
Convenient Installation: This greenhouse kit is included clear instructions, it's very easy to follow. Every part is clearly labeled, all tools you need are also included. If you need any help in installation, please feel free to contact us.
Potting Bench,Backyard Potting Bench,Natural Wooden Work Station,Garden Bench Table
HANGZHOU JIEYUN IMP & EXP CO., LTD , https://www.jaalex-garden.com