Programmable high and low temperature test chamber for optimal installation

Programmable high and low temperature test chambers should be installed in strict accordance with the equipment operating instructions. The correct installation method will be beneficial to the performance and service life of the programmable high and low temperature test chamber. We must meet the following requirements for the installation of programmable high and low temperature test chambers. condition:

1. The relative humidity in the air is low, the dust is small, the air is clean and well ventilated, away from inflammable and explosive, corrosive chemicals and harmful unsafe items, avoiding places near dust.

2. The ambient temperature in the installation site should be between 5 °C and +30 °C (average temperature within 24 hours ≤ 30 °C), the temperature difference should not be too large, because the higher the ambient temperature, the higher the compressor discharge temperature, which will affect To the performance of programmable high and low temperature test chamber compressors, if necessary, ventilation or cooling devices should be installed at the installation site.

3. Reserve maintenance and maintenance space, at least 70 cm or more between the high and low temperature test chambers and the wall.

In order to have a better operating efficiency for a programmable high and low temperature test chamber, it is important to choose the right installation.

Trimmer Line

Trimmer Line,Strimmer Wire,Line Trimmer,Trimmer Head

Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com