Repair method of loose shell at tennis court

Loose shell repair

1 If there is a problem of loose shells in the asphalt base, the large sag that occurs after cutting and eradicating must be filled. If the depth of the dent is more than 10mm, in order to shorten the time required for the repair, the following two repair schemes are recommended:

First, the program: polyurethane adhesive and black particles

Firstly, a thin layer of primer oil is coated with a polyurethane adhesive, and the polyurethane adhesive and the black rubber particles are mixed and stirred in a ratio of 1:6. After spreading, they are spread in the depression and leveled with aluminum alloy rods. After that, it is really shot with a trowel. Do not add any thinner. Add driers as appropriate. Generally 24 hours can be cured and dried.

Note: If the depression is too deep, it is recommended to use small particles of black rubber particles that will not cause the site to be too soft.

II. Option 2: Acrylic Leveler (PW-002) and Quartz Sand

The acrylic leveler (PW-002), quartz sand and water are configured in the following proportions:

PW-002 : Quartz Sand: Water = 10 Gallons: 50 kg: 10 Gallons

After the mixture is fully stirred and evenly spread, it is paved in a depression, flattened with an aluminum alloy rod, and then scraped evenly with a scraping scraper.

Note: Quartz sand uses a coarse grain size. The repair effect is good, but the drying time is longer.

3.0 Construction of Acrylic Smoothing Layer

3.1 The role of leveling layer

After the pit is repaired and finished, a leveling layer can be constructed. The leveling layer is the foundation stone and supporting layer of the entire coating structure. It is not only the true close-fitting adhesive layer of the asphalt foundation, completely covering the asphalt foundation seal, but also contains a certain thickness of quartz sand, and a large amount of voids on the asphalt foundation. With fill leveling function, it has a certain leveling effect on subtle irregularities.

3.2 material ratio

The material used for the leveling layer is a mixture of acrylic leveler (PW-002), quartz sand and clean water. The material configuration is as follows:

PW-002 : Quartz Sand: Water = 10 Gallons: 50 kg: 10 Gallons

The porosity of the asphalt base may vary greatly depending on the size of the stone used. Therefore, the choice of quartz sand should be based on the roughness of the asphalt surface. Too coarse, you should use a small number of quartz sand, on the contrary, you should use a larger mesh of quartz sand, but not more than 40 to 70 mesh.

Art Brush

Art Brush is a type of painting Brush , it is widely used for Painting like Oil Painting Brush, Acrylic Painting Brush, Watercolor Painting Brush. There are art Brush for artists and students. Currently there are lots of brands in the market. It has different shapes like FLAT, Oval, Filbert, Round, Lines Brush.

SAMINA FORAM(SHENZHEN) CO.LTDwas established in 1976 and in 1991, we moved from Korea to Shenzhen, China. At that time, our company had about 200 technicians who were our most valuable assets. For us, each employee is an important part of our road to success, and their skills and experience are critical to the development of our company. Our business philosophy is to inspect all products 100%. This means that we carry out meticulous quality checks on each and every product to ensure that the quality of the product meets the needs and expectations of our customers. We are convinced that only through our unremitting efforts and strict quality standards can we gain a competitive edge in the market and win the trust of our customers.

Art Brush,Painting Brush,Art Brush Set,Artist Brush

SAMINA FORAM (SHENZHEN) CO., LIMITED. , https://www.saminabrush.com