The best solution for finishing wardrobes to save space

[ Chinese wardrobe network ] In recent years, the wardrobe began to “drill” into the wall from the wall, which greatly released the space and increased the practical area. The square dressing room can be designed as a U-shaped cabinet that fits perfectly into the wall. The deep-shaped room, the wardrobe is arranged in parallel, and the dressing space of about 1 square meter can be reserved. The wide and long room is better with an L-shaped cabinet design when the depth is not very high, so that you can have the widest visual effect and storage.

In addition, the closet can be used as a part of the wall in a color similar to a wall, or a mirror can be used as a countertop to visually narrow the space.

The merchant does not divide the internal structure of the wardrobe or simply divide it. Some simply place a clothes rail, and the different lengths of clothes are hung together, which causes a great waste of the lower space and also allows the consumer to use the wardrobe. It is very inconvenient.

A reasonable division can accommodate more clothes. Many people say that the wardrobe can't put too much stuff on it. As long as you look closely, you will find that there is still a lot of space in the wardrobe that is wasted.

For consumers with a very limited urban living area, it is largely equivalent to wasting money and space. The general wardrobe will be equipped with a lattice frame, drawers, push-pull mirrors, pants racks, small hooks, and hanging baskets. You can choose the combination of cabinets according to your actual needs and living habits.

Tipping machines,

Our Tipping machines is used to tip the Tipping Film on both end of shoelace, or bag handle rope lace. there is fully Automatic Tipping Machine. We have max 1.5meter, 2meter, 2.5meter according to customer demand. We also have semi auto Tipping Machine, which have no length limited, but need one operator to work.

The advantages of the tipping machines, 
1, the processing temperature can be adjusted automatically, normally in 50°to 60°.When reaching the set temp, it will be fixed automatically.  
2, the main motor has the overload protection function. 
3, the machine is equipped with special safety device and the base of the mold is made of high quality casting, so, the mold can be used for a longer life. 
4, strong structure and safe operation and good materials and good brand electrical parts, technically and mechanically, the whole machine can be used for at least 20 to 30 years without any problems. 
5, the machine has the function of programming protection, under which function the machine parts will not be easily broken because of reverse or wrong power connection. When power cable is wrongly connected, the machine will not run. 
6, the machine will stop working automatically when there is no tipping film feeding, under which function the machine idle running will be avoided.

Tipping Machine

Tipping Machine,Tipping Film,Automatic Tipping Machine,Transparent Tipping Film, semi auto tippin machine

DongGuan FeiYang Packaging Machinery Equipment Co., Ltd , https://www.feiyang-machinery.com