Application of fiber laser marking in IC card industry

Fiber laser marking is mainly used in mobile phone card marking in the telecommunications industry and IC card marking in urban public utilities. Its specific application areas cover public transportation, rental, rail transit (metro), water supply, heating, gas, garden landscape, A wide range of areas such as digital communities, road and bridge tolls, and parking lot management.

A smart card (IC card), also known as a smart card, a smart card, an integrated circuit card, and an IC card, refers to a portable card plastic that is affixed or embedded with an integrated circuit chip. It is formed by embedding an integrated circuit chip with a microprocessor and a large-capacity memory on a plastic substrate, and its shape is very similar to that of a normal*. Smart cards have emerged with the development of semiconductor technology and the increasing demands of society for information security and storage capacity. Today, smart cards have become a new star in the information society. Common smart cards include telephone IC cards, identity IC cards, and some transportation tickets and memory cards.


Figure 1: Laser marking of many smart cards

China's IC card industry is developing at an alarming rate. Especially in the past two years, China's annual card issuance exceeds 100 million. The application areas of IC cards cover telecommunications, social security, *, banking, tax, public transportation, and highway cards. , fuel cards and many other industries. With the expansion of the scale of IC card applications, the packaging, printing and labeling business of cards has developed into industrial production.

With the development of the IC card industry and the improvement of the requirements for card making, the printing method of the card has gradually shifted from ink printing and thermal transfer to laser printing.

Comparison of fiber laser marking and other card making technologies

Laser marking is replacing traditional card-making technology with more and more applications due to its unmatched advantages such as permanent marking and no consumables. In addition, due to the rapid development of laser technology and the market demand for laser products with high output power, small size and low maintenance, the laser module integrated in the card issuing machine has been pumped from the lamp pumping machine and diode pump. The standard machine gradually developed into a fiber laser marking machine.

The fiber laser marking machine uses a computer controlled laser to etch characters, patterns or barcodes on the surface of the card, and has the advantages of more beautiful marking, no consumables, and maintenance-free.

Table 1: Comparison of thermal transfer and fiber laser marking

Table 2: Comparison of fiber lasers with other lasers

Card-making efficiency of fiber laser marking machine

The fiber laser marking machine is integrated on a small card issuing machine. For example, a 10W fiber laser marking machine integrated on the PT3080 can mark up to 750 cards per hour.


Figure 2: PT3080 Small Card Issuer System

The fiber-optic marking machine integrated in the MPR series of large-scale card issuing machines can mark 4000~6000 cards per hour.


Figure 3: MPR Large Card Issuer System

Materials for fiber laser marking applications

Fiber laser marking can mark a wide range of materials, including PVC, PC, high temperature plastics, Teslin, ABS, PET, PET-G, PET-F and other materials.

Application examples of fiber laser marking in the IC card industry

Fiber laser marking is mainly used in mobile phone card marking in the telecommunications industry and IC card marking in urban public utilities. Its specific application areas cover public transportation, rental, rail transit (metro), water supply, heating, gas, garden landscape, A wide range of areas such as digital communities, road and bridge tolls, and parking lot management. The following are some specific application areas and marking examples of fiber laser marking.

1, the telecommunications industry

(1) SIM card


Figure 4: Mobile phone card marked with a 30W fiber laser marking machine

Figure 4 shows the marking effect on a mobile phone card with a 30W fiber laser marking machine. The mobile phone card laser marking content is mainly 128, 39 barcodes and numbers. Generally, there are certain requirements for the readable level of the barcode. Marked with a 30W fiber laser marking machine, each card uses a marking time of less than 1 second (depending on the material). Of course, for the same marking content, the higher the average output power of the laser, the shorter the time required for marking.

(2) Mobile payment card

2. Transportation industry

(1) City traffic card

(2) Railway card

3. Enterprise application

(1) Company access card

(2) Campus card

(3) Gas card

(4) Power smart card

4. Government industry

(1) ID card

(2) Driver's license

(3) Electronic passport

(4) Citizen card

(5) Social Security Card

5. Finance and retail

(1) Shopping malls, supermarkets, stored value cards

(2) Bank debit card

(3) Online banking USB key


Figure 5: Marking effect of mobile payment card, city card, campus card and ID card

The application of smart cards has covered many fields of today's social economy. According to the survey of international professional organizations, there are currently billions of smart cards being used internationally, and the application of smart cards in large and medium cities in China is becoming more and more popular. In some places, the local government even built the city card or citizen card project as a kind of "people's heart project" to build it. It has also played a very good effect in real life and has played an active role in promoting the overall harmonious society. Promotion. Therefore, with the development of the smart card industry, the application of laser technology will become more and more extensive.

The Card Slot Back Cover with the protect function , and you could put the card slots ,it more convient you life .It could fit all phone size , Like S, M and L  size (4.7-5.5).We sell Pu/genunine Leather Phone Case,card Slot Phone Case,folio Phone Case , Card Slot Back Cover,Leather Mobile Phone Cover,Universal Leather Case.

6

  We employ the most creative designers and tech brilliant engineers to make the best cases. We believe our high-quality products with competitive prices will satisfy your needs.  

The productive process :

Make the Products Mould –Cutting the fabric –Do the half products – Finish products – Cleaning –QC- Package – Shippment .

Card Slot Back Cover

Slot Phone Case,Phone Case Cover,Card Slot Back Cover,Card Slot With Phone Case

Guangzhou Ysure Electronic Technology Co., Ltd. , https://www.ysurecase.com

Posted on