Omron will launch CP1H series PLC

CP1H series PLC is a small-scale PLC that integrates the basic functions of CS/CJ and is planned to be launched by Omron in August this year. It includes a CP1H host and a 40-point expansion module. The performance is much improved compared to the CPM1A/CPM2A/CPM2AH series. In the textile, printing, packaging, rubber and medical and other industries machinery and equipment.

The model is small in size and extremely fast. It requires only 0.1μs to execute basic commands, and has built-in powerful functions. For example, it provides 4-axis high-speed counting (up to 100KHz) plus 8 axes 10K Hz single-phase counting and 4-axis pulse output. (Maximum 100K Hz) plus 8 points more than 50μs pulse capture function, and can also bring up to 7 sets of OMRON CPM1A series expansion I/O and 2 sets of CJ1 series high-function I/O or high-function CPU units, so Its maximum switching capacity of up to 320 points, analog capacity of up to 37, UM capacity up to 20K steps, DM capacity of up to 32K words. Two 7-segment LED digital displays are installed on the front panel of the host to display the user's required data such as fault codes and alarm codes, which greatly simplifies the debugging and maintenance procedures. In addition, the CP1H series XA PLC mainframe also has built-in 4 input and 2 output analog channels, and its full-scale resolution is 1/6000. Therefore, for a small system with only a few analog I/Os, it is more convenient to simplify Configure and reduce costs.

CP1H series PLC supports a variety of communication functions, using a built-in USB peripheral port, you can use a universal cable to connect to the computer for programming and debugging, using two RS232C or RS485 optional serial communication port, you can achieve the upper link, no agreement Communication, NT link (1:N), serial gateway function (CompoWay/F master station, Modbus-RTU master station), serial PLC link function (up to 9 units), etc., so the user can freely combine serial communication according to the application The mouth is more conducive to simplifying the procedure and improving the responsiveness of the PLC.

CP1H series PLC has good compatibility, using the same command language system of CJ/CS, so it can easily share the ladder diagram of CJ/CS. The programming tool is Omron CX-Programmer software Ver6.1 or later, and CJ/CS, etc. The model PLC is exactly the same. It also supports FB and ST programming. It has floating-point arithmetic, trigonometric arithmetic, and PID arithmetic command language, thus greatly reducing the time for program development, diagnosis, and debugging.