![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
In the production of wide-mouth glass bottles, there are many manual machines (there are foot-operated hand-turning bottles), and the two production processes of the assembly line, different processes, and different prices, many customers do not understand, do not understand, The specific differences are:
1, manual machine wide-mouth glass bottles, due to manual operation, due to different operators, make the effect and quality of the product will be different, particularly evident at the bottom of the jar, the uniformity will vary from person to person, For a single species, the operation time will be improved and the assembly line will be different. The machine parameters controlled by the computer numerical control program and the number of bottle drops will be uniform and accurate, and the product finish, uniformity and crescent line at the bottom of the bottle are very clear. It is very beautiful, suitable for filling large-scale assembly line containers, which can improve production capacity and yield efficiency.
2. When the manual machine production process is in operation, the wide-mouth bottle mouth mold will be biased or not in place. It is not true that the wide mouth mouth bottle mouth uniformity will vary greatly, but the manual operation will also be due to the individual bottle type. And it will be more flexible than the assembly line, so as to achieve the product line can not make the effect.
3, manual machine mold is mostly used to open the mold with the handle, the bottle shape cooling and the mold line are with air blowing sooner or later and open and close mold time sooner or later and the length will be affected, the assembly line is different, the mold vent and open and close The time is accurate, the impact on the product shape is very small, and the product line made will be very small.
4. The manual machine production process does not require high production sites and production change time. It can flexibly meet the needs of small single-quantity customers. The mold production time is short and the cost is low. It is also a reason that the manual machine technology has always been welcomed by the glass bottle manufacturers. One, while the assembly line will have certain requirements on the production site and the number of products.
5. Nowadays, many glass bottle manufacturers will install manual machines and assembly lines on the same kiln, so as to achieve complementary production capabilities, maximize production efficiency, and meet the needs of different customers.
1, manual machine wide-mouth glass bottles, due to manual operation, due to different operators, make the effect and quality of the product will be different, particularly evident at the bottom of the jar, the uniformity will vary from person to person, For a single species, the operation time will be improved and the assembly line will be different. The machine parameters controlled by the computer numerical control program and the number of bottle drops will be uniform and accurate, and the product finish, uniformity and crescent line at the bottom of the bottle are very clear. It is very beautiful, suitable for filling large-scale assembly line containers, which can improve production capacity and yield efficiency.
2. When the manual machine production process is in operation, the wide-mouth bottle mouth mold will be biased or not in place. It is not true that the wide mouth mouth bottle mouth uniformity will vary greatly, but the manual operation will also be due to the individual bottle type. And it will be more flexible than the assembly line, so as to achieve the product line can not make the effect.
3, manual machine mold is mostly used to open the mold with the handle, the bottle shape cooling and the mold line are with air blowing sooner or later and open and close mold time sooner or later and the length will be affected, the assembly line is different, the mold vent and open and close The time is accurate, the impact on the product shape is very small, and the product line made will be very small.
4. The manual machine production process does not require high production sites and production change time. It can flexibly meet the needs of small single-quantity customers. The mold production time is short and the cost is low. It is also a reason that the manual machine technology has always been welcomed by the glass bottle manufacturers. One, while the assembly line will have certain requirements on the production site and the number of products.
5. Nowadays, many glass bottle manufacturers will install manual machines and assembly lines on the same kiln, so as to achieve complementary production capabilities, maximize production efficiency, and meet the needs of different customers.
Potato Ricer,Pressure Cooker,Electric Potato Masher,Large Potato Ricer
Jiangmen Hoffee Houseware Company Ltd. , https://www.hoffee-houseware.com